No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
forward-mode

forward-mode

Function

The forward-mode command sets the data forwarding mode in a VAP profile.

The undo forward-mode command restores the default data forwarding mode in a VAP profile.

By default, the forwarding mode is direct-forward in the VAP profile.

Format

forward-mode { direct-forward | tunnel | softgre profile-name }

undo forward-mode

Parameters

Parameter

Description

Value

direct-forward

Indicates the direct forwarding mode.

-

tunnel

Indicates the tunnel forwarding mode.

-

softgre profile-name

Specifies the soft GRE tunnel forwarding mode and the name of the soft GRE profile referenced by the VAP profile.

The soft GRE profile must exist.

Views

VAP profile view

Default Level

2: Configuration level

Usage Guidelines

You can run the forward-mode command to configure the forwarding mode in a VAP profile. The forwarding modes of VAP profiles can be different.

A soft GRE profile can be applied to a VAP profile only after a destination address is configured for the soft GRE tunnel in the soft GRE profile.

Example

# Create the VAP profile vap1 and set the forwarding mode to tunnel forwarding in the profile.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] vap-profile name vap1
[HUAWEI-wlan-vap-prof-vap1] forward-mode tunnel
Warning: This action may cause service interruption. Continue?[Y/N]y
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115563

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next