No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap update load

ap update load

Function

The ap update load command upgrades a specified AP.

The undo ap update load command cancels AP upgrade.

Format

ap update load { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } update-filename update-file-name

undo ap update load { ap-name ap-name | ap-mac ap-mac | ap-id ap-id }

Parameters

Parameter

Description

Value

ap-name ap-name

Specifies the name of the AP to be upgraded.

The AP name must already exist.

ap-mac ap-mac

Specifies the MAC address of the AP to be upgraded.

The AP's MAC address must already exist.

ap-id ap-id

Specifies the ID of the AP to be upgraded.

The AP ID must already exist.

update-filename update-file-name

Specifies the AP upgrade file.

The upgrade file name must already exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

When APs are upgraded in batches based on AP types, if the new version fails, the version rollback takes a long period. Therefore, you can update a single AP to check whether faults occur on the version, ensuring successful upgrades in batches.

Prerequisites

When the AC mode is used, the AP upgrade file has been uploaded to the AC. If the FTP or SFTP mode is used, the AP upgrade file has been uploaded to the FTP server or SFTP server.

The AP is in normal or vmiss state.

Follow-up Procedure

Run the ap update reset { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } command to restart the AP to make the upgrade take effect.

Precautions

The undo ap update load { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } command cancels AP upgrade. However, if the AP system software has been written to the flash memory during the upgrade, the command does not take effect. You can run the display ap update status { ap-name ap-name | ap-id ap-id } command to check AP upgrade progress.

Example

# Upgrade the AP N1-2 using the upgrade file FitAP6050DN_V200R010C00.bin.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap update load ap-name N1-2 update-filename FitAP6050DN_V200R010C00.bin
Info: The current upgrade mode is AC mode, which may affect performance and take a long time. The FTP or SFTP upgrade mode is recomm
ended. Continue? [Y/N]:y
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113073

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next