No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wlan non-wifi-device

display wlan non-wifi-device

Function

The display wlan non-wifi-device command displays information about detected non-Wi-Fi devices.

Format

display wlan non-wifi-device { all | { ap-name ap-name | ap-id ap-id } radio radio-id }

Parameters

Parameter

Description

Value

all

Displays information about the non-Wi-Fi devices detected by all APs.

-

ap-name ap-name

Displays information about the non-Wi-Fi devices detected by a specified AP name.

The AP name must exist.

ap-id ap-id

Displays information about the non-Wi-Fi devices detected by a specified AP ID.

The AP ID must exist.

radio radio-id

Displays information about the non-Wi-Fi devices detected by a specified AP radio.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AP4030TN, AP4051TN, and AP8050TN-HD.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After the function of reporting spectrum data is enabled on an AP radio using the spectrum-report command, you can run the display wlan non-wifi-device command to check information about the detected non-Wi-Fi devices.

Example

# Display information about the non-Wi-Fi devices detected by all APs.

<HUAWEI> display wlan non-wifi-device all
Info: This operation may take a few seconds. Please wait for a moment.done.
----------------------------------------------------------------
Detect AP ID                           : 0
Detect AP name                         : 1000-0000-0011
Detect AP radio ID                     : 1
Detect AP channel                      : 149
Non-Wi-Fi device type                  : 7
Non-Wi-Fi device name                  : 5G WirelessTransmitter
Non-Wi-Fi device frequency type        : Narrow bandwidth
Non-Wi-Fi device channel               : 
Non-Wi-Fi device RSSI                  : 
Non-Wi-Fi device detect time last      : 1983-08-11/06:45:45
Non-Wi-Fi device center frequency(MHz) : 2422
Non-Wi-Fi device bandwidth(KHz)        : 20
Non-Wi-Fi device duty(%)               : 70
Non-Wi-Fi device interfere level       : 3
----------------------------------------------------------------
----------------------------------------------------------------
Detect AP ID                           : 1
Detect AP name                         : 1000-0000-0010
Detect AP radio ID                     : 0
Detect AP channel                      : 11
Non-Wi-Fi device type                  : 6
Non-Wi-Fi device name                  : 2.4G WirelessTransmitter
Non-Wi-Fi device frequency type        : Narrow bandwidth
Non-Wi-Fi device channel               : 
Non-Wi-Fi device RSSI                  : 
Non-Wi-Fi device detect time last      : 1983-08-11/01:12:25
Non-Wi-Fi device center frequency(MHz) : 2412
Non-Wi-Fi device bandwidth(KHz)        : 12
Non-Wi-Fi device duty(%)               : 94
Non-Wi-Fi device interfere level       : 3
----------------------------------------------------------------
Total: 2
Table 11-132  Description of the display wlan non-wifi-device command output

Item

Description

Detect AP ID

ID of the AP that has detected a non-Wi-Fi device.

Detect AP name

Name of the AP that has detected a non-Wi-Fi device.

Detect AP radio ID

ID of the AP radio on which a non-Wi-Fi device is detected.

Detect AP channel

ID of the AP channel on which a non-Wi-Fi device is detected.

Non-Wi-Fi device type

Type of the detected non-Wi-Fi device.
  • 0: Cordless phone
  • 1: Cordless phone base
  • 2: ZigBee device
  • 3: Microwave oven
  • 4: Bluetooth
  • 5: Game controller
  • 6: 2.4G wireless video and audio device
  • 7: 5G wireless video and audio device
  • 8: Baby monitor
  • 9: Fixed-frequency device

Non-Wi-Fi device name

Name of the non-Wi-Fi device.

Non-Wi-Fi device frequency type

Frequency type of the non-Wi-Fi device.

Non-Wi-Fi device channel

Channel of the non-Wi-Fi device.

Non-Wi-Fi device RSSI

RSSI of the non-Wi-Fi device.

Non-Wi-Fi device detect time last

Detection time for the non-Wi-Fi device.

Non-Wi-Fi device center frequency(MHz)

Center frequency of the non-Wi-Fi device.

Non-Wi-Fi device bandwidth(KHz)

Bandwidth of the non-Wi-Fi device.

Non-Wi-Fi device duty(%)

Duty cycle of the non-Wi-Fi device.

Non-Wi-Fi device interfere level

Interference level of the non-Wi-Fi device. The value ranges from 0 to 3. A larger value indicates stronger interference.

Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127001

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next