No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
traffic-optimize multicast-suppression

traffic-optimize multicast-suppression

Function

The traffic-optimize multicast-suppression command sets the maximum traffic volume of multicast packets in a traffic profile.

The undo traffic-optimize multicast-suppression command cancels the limit on the maximum traffic volume of multicast packets in a traffic profile.

By default, multicast packets are not suppressed in a traffic profile.

Format

traffic-optimize multicast-suppression packets packets-rate

undo traffic-optimize multicast-suppression

Parameters

Parameter

Description

Value

packets packets-rate

Specifies the number of packets transmitted per second.

The value ranges from 0 to 14881000, in pps.

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

When a large number of multicast packets are transmitted on a network, a lot of network resources are occupied, and services on the network are affected.

To ensure normal service transmission on a network, you can run the traffic-optimize multicast-suppression command to configure the maximum multicast traffic volume in a traffic profile. When the traffic volume of multicast packets reaches the maximum, the system discards excess multicast packets to control the traffic volume in a proper range.

Example

# Set the maximum traffic volume of multicast packets to 21600 pps in the traffic profile p1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] traffic-optimize multicast-suppression packets 21600
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115499

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next