No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
deauth-fail-times

deauth-fail-times

Function

The deauth-fail-times command sets the maximum number of attempts to migrate STAs in deauthentication mode.

The undo deauth-fail-times command restores the default maximum number of attempts to migrate STAs in deauthentication mode.

By default, the maximum number of attempts to migrate STAs in deauthentication mode is 2.

Format

deauth-fail-times deauth-fail-times

undo deauth-fail-times

Parameters

Parameter

Description

Value

deauth-fail-times

Specifies the number of attempts to migrate STAs in deauthentication mode.

The value is an integer that ranges from 0 to 5.

The value 0 indicates that the deauthentication mode is not used to migrate STAs.

Views

Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The device attempts to use the 802.11v and deauthentication modes to trigger STA migration to the target AP. Due to differences of STAs, some STAs can be successfully migrated in deauthentication mode after multiple attempts. You can run the deauth-fail-times command to set the maximum number of attempts to migrate STAs in deauthentication mode. If the number of attempts exceeds the specified value, STAs cannot be migrated.

Precautions

You are advised to retain the default value. If the success rate of STA migration in deauthentication mode is low or STA services are affected, set the parameter value to 0 to disable STA migration in deauthentication mode.

This command is valid only in sta-number mode.

Example

# Set the maximum number of attempts to migrate STAs in deauthentication mode to 1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-load-balance static-group name coco
[HUAWEI-wlan-rrm-prof-default] deauth-fail-times 1
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114248

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next