No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap update schedule-task

ap update schedule-task

Function

The ap update schedule-task command configures a scheduled AP upgrade task.

The undo ap update schedule-task command deletes a scheduled AP upgrade task.

By default, no scheduled AP upgrade task is configured.

Format

ap update schedule-task task-id task-id start-time start-time start-date stop-time stop-time stop-date ap-type type-id [ ap-group group-name | { { ap-name ap-name } &<1-10> } | { { ap-id ap-id } &<1-10> } ]

ap update schedule-task task-id task-id start-time start-time start-date stop-time stop-time stop-date ap-group group-name

undo ap update schedule-task { all | task-id task-id }

Parameters

Parameter

Description

Value

task-id task-id

Specifies the ID of a scheduled AP upgrade task.

The value is an integer that ranges from 0 to 31.

start-time start-time

Specifies the start time of the scheduled AP upgrade task.

The value is in HH:MM format, ranging from 00:00 to 23:59.

start-date

Specifies the start date of the scheduled AP upgrade task.

The value is in YYYY/MM/DD format, ranging from 2000-01-01 to 2050-12-31.

stop-time stop-time

Specifies the end time of the scheduled AP upgrade task.

The value is in HH:MM format, ranging from 00:00 to 23:59.

stop-date

Specifies the end date of the scheduled AP upgrade task.

The value is in YYYY/MM/DD format, ranging from 2000-01-01 to 2050-12-31.

stop-time stop-date must be later than start-time start-date.

ap-type type-id

Specifies an AP type ID.

The value is an integer.

To view all AP types, run the display ap-type all command.

ap-group group-name

Specifies an AP group name.

The AP group must exist.

ap-name ap-name

Specifies an AP name.

The AP name must exist.

ap-id ap-id

Specifies an AP ID.

The AP ID must exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can configure a scheduled AP upgrade task to upgrade APs in a specified time period, such as off-peak hours.

If you specify ap-group group-name in the command, the configured task will upgrade only APs in the specified AP group. Similarly, if you specify ap-type type-id, ap-name ap-name, or ap-id ap-id, the configured task will upgrade only the specified APs.

The scheduled task configuration will not be automatically deleted after a scheduled upgrade task is completed. To delete the task, run the undo ap update schedule-task { all | task-id task-id } command.

Prerequisites

The AP upgrade file has been specified using the ap update update-filename command. To check the status of scheduled AP upgrade tasks, run the display ap update schedule-task command.

Configuration Impact

  • For scheduled AP upgrade tasks with the same start time, the task with a smaller task-id task-id is executed preferentially.

  • During the scheduled AP upgrade, if the time for task B is reached before task A is completed, task B waits until task A is completed. Subsequent scheduled AP upgrade tasks wait in sequence until the previous task is completed.

  • When the time specified by stop-time stop-time stop-date is reached, ongoing upgrade tasks continue until the upgrade is completed and those tasks waiting in queues stop.

  • After APs in a scheduled upgrade task are all upgraded, the APs automatically restart. The APs that fail the upgrade do not restart.

  • After a scheduled AP upgrade task is configured, if the AP group or all APs are deleted, the task fails to be executed, which is not recorded as upgrade failure information.

  • If an AP is performing the automatic upgrade when you configure a scheduled AP upgrade task, the upgrade continues until the upgrade is completed. APs that have not started the automatic upgrade will not execute the automatic upgrade.

Example

# Configure APs with ap-type as 54 to perform the scheduled upgrade from 01:00 to 04:00 on May 20, 2016.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap update schedule-task task-id 1 start-time 1:00 2016/5/20 stop-time 4:00 2016/5/20 ap-type 54
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126093

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next