No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wep default-key

wep default-key

Function

The wep default-key command sets the default key ID for WEP authentication or encryption.

The undo wep default-key command restores the default key ID for WEP authentication or encryption.

By default, key 0 is used for WEP authentication or encryption.

Format

wep default-key key-id

undo wep default-key

Parameters

Parameter

Description

Value

key-id

Specifies the default key ID.

The key ID must exist.

Views

Security profile view

Default Level

2: Configuration level

Usage Guidelines

  • A maximum of four WEP keys can be configured, and only one WEP key is used for authentication and encryption. This command specifies which key to use.
  • After a key ID is specified, the specified key is used for authentication or encryption.
  • Each AP can have at most four key indexes configured. The key indexes used by different VAPs cannot be the same.

  • The system displays the message only when the security profile has been bound to the other profiles.

Example

# Set the default key ID to 1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] security-profile name p1
[HUAWEI-wlan-sec-prof-p1] wep default-key 1
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123818

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next