No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mobility-group

mobility-group

Function

The mobility-group command creates a mobility group and displays the mobility group view. If the specified mobility group exists, you can directly enter the specified mobility group view.

The undo mobility-group command deletes a mobility group.

By default, no mobility group is created.

Format

mobility-group name group-name

undo mobility-group { name group-name | all }

Parameters

Parameter

Description

Value

name group-name

Specifies the name of a mobility group.

The value is a string of 1 to 31 characters. It does not contain question marks (?) or spaces, and cannot begin or end with double quotation marks (" ") .

all

Indicates all mobility groups.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

STAs can roam between ACs in a mobility group. You can run the mobility-group command to create a mobility group and add required ACs to the group.

Follow-up Procedure

Run the member (mobility group view) ip-address ipv4-address [ description description ] command to add member ACs to the mobility group.

Example

# Create a mobility group named mobility and display the mobility group view.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mobility-group name mobility
[HUAWEI-mc-mg-mobility]

# Delete a mobility group.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] undo mobility-group name mobility
Warning:The mobility group will be deleted, are you sure to continue?[Y/N]:y

# Delete all mobility groups.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114036

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next