No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display vap

display vap

Function

The display vap command displays information about service VAPs.

Format

display vap { ap-group ap-group-name | { ap-name ap-name | ap-id ap-id } [ radio radio-id ] } [ ssid ssid ]

display vap { all | ssid ssid }

Parameters

Parameter

Description

Value

ap-group ap-group-name

Displays information about all service VAPs in a specified AP group.

The AP group must exist.

ap-name ap-name

Displays information about service VAPs on the AP with a specified name.

The AP name must exist.

ap-id ap-id

Displays information about service VAPs on the AP with a specified ID.

The AP ID must exist.

radio radio-id

Displays information about service VAPs of a specified AP radio.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AP4030TN, AP4051TN, and AP8050TN-HD.

ssid ssid

Displays information about service VAPs of a specified SSID.

The SSID must exist.

all

Displays information about all service VAPs.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display vap command to view information about service VAPs.

Example

# Display information about all service VAPs.

<HUAWEI> display vap all
WID : WLAN ID
-----------------------------------------------------------------------------
AP ID AP name        RfID WID  BSSID          Status  Auth type  STA   SSID
-----------------------------------------------------------------------------
3     ap1            0    1    0023-0024-0080 ON      Open       0     ag
-----------------------------------------------------------------------------
Total: 1
Table 11-97  Description of the display vap command output

Item

Description

AP ID

AP ID.

AP name

AP name.

RfID

Radio ID.

WID

WLAN ID of a VAP.

SSID

SSID name.

BSSID

MAC address of a VAP.

Status

Current status of a VAP.
  • ON: The VAP service is enabled.
  • OFF: The VAP service is disabled.

Auth type

Authentication mode of a VAP.

STA

Number of terminals connected to a VAP.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114090

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next