No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
igmp-snooping max-bandwidth (traffic profile view)

igmp-snooping max-bandwidth (traffic profile view)


The igmp-snooping max-bandwidth command configures the maximum multicast bandwidth for a VAP.

The undo igmp-snooping max-bandwidth command deletes the maximum multicast bandwidth of a VAP.

By default, the maximum multicast bandwidth is not configured for a VAP.


igmp-snooping max-bandwidth max-bandwidth

undo igmp-snooping max-bandwidth


Parameter Description Value


Specifies the maximum multicast bandwidth of a VAP. The value is an integer that ranges from 1 to 10000000, in kbps.


Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The maximum multicast bandwidth is configured for a VAP in a traffic profile to limit the multicast traffic forwarding capacity of the VAP to which this traffic profile is bound. When the available multicast bandwidth of a VAP is insufficient, new users are prevented from joining multicast groups.


After configuring the maximum multicast bandwidth for a VAP, run the igmp-snooping group-bandwidth (AP system profile view) command to configure the bandwidth of global multicast groups on the AP.


# Set the maximum multicast bandwidth to 500 kbps in traffic profile p1.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] igmp-snooping max-bandwidth 500
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 146138

Downloads: 92

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next