No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display station steer-statistics

display station steer-statistics


The display station steer-statistics command displays statistics about STA migrations.


display station steer-statistics




All views

Default Level

1: Monitoring level

Usage Guidelines

After the load balancing, band steering, or smart roaming function is enabled, STAs are migrated. You can run this command to check statistics about STA migrations.


# Display statistics about migrations of all STAs.
<HUAWEI> display station steer-statistics
Reason        Total/Success        Deauth(Total/Success)   BTM(Total/Accept/REJ1/REJ2/REJ3/REJ4/REJ5/REJ6/REJ7/REJ8/TimeOut)
Sticky        0/0                  0/0                     0/0/0/0/0/0/0/0/0/0/0
Load-balance  0/0                  0/0                     0/0/0/0/0/0/0/0/0/0/0
Band-steer    0/0                  0/0                     0/0/0/0/0/0/0/0/0/0/0
Total         0/0                  0/0                     0/0/0/0/0/0/0/0/0/0/0
Table 11-127  Description of the display station steer-statistics command output




Reason why a STA is triggered to migrate.
  • Sticky: The STA is sticky.
  • Load-balance: Load balancing is implemented.
  • Band-steer: Band steering is implemented.


Total number of triggered STA migrations/Number of successful STA migrations.


Total number of STA migrations triggered in deauthentication mode/Number of successful STA migrations triggered in deauthentication mode.


Total number of STA migrations triggered in BTM mode/Number of successful STA migrations triggered in BTM mode/Number of rejected STA migrations in BTM mode/Number of STA migrations that are timed out in BTM mode. The options are as follows:
  • REJ1: Reject-Unspecified reject reason.
  • REJ2: Reject-Insufficient Beacon or Probe Response frames received from all candidates.
  • REJ3: Reject-Insufficient available capacity from all candidates.
  • REJ4: Reject-BSS termination undesired.
  • REJ5: Reject-BSS termination delay requested.
  • REJ6: Reject-STA BSS Transition Candidate List provided.
  • REJ7: Reject-No suitable BSS transition candidates.
  • REJ8: Reject-Leaving ESS.
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124000

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next