No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wids-spoof-profile (WLAN view)

wids-spoof-profile (WLAN view)

Function

The wids-spoof-profile command creates a WIDS spoof SSID profile and displays the WIDS spoof SSID profile view.

The undo wids-spoof-profile command deletes a WIDS spoof SSID profile.

By default, no WIDS spoof SSID profile exists in the system.

Format

wids-spoof-profile name profile-name

undo wids-spoof-profile { name profile-name | all }

Parameters

Parameter

Description

Value

name profile-name

Specifies the name of a WIDS spoof SSID profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").

all Deletes all WIDS spoof SSID profiles. -

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

WLAN services are available in public places, such as banks and airports. Users can connect to the WLANs after associating with corresponding SSIDs. If a rogue AP is deployed and provides spoofing SSIDs similar to authorized SSIDs, the users may be misled and connect to the rogue AP, which brings security risks. To address this problem, configure a fuzzy matching rule to identify spoofing SSIDs. After you create a WIDS spoof SSID profile using the wids-spoof-profile command, run the spoof-ssid command to configure a fuzzy matching rule to identify spoofing SSIDs.

Follow-up Procedure

Run the wids-spoof-profile (WIDS profile view) command to bind the WIDS spoof SSID profile to a WIDS profile to make the WIDS spoof SSID profile take effect.

Example

# Create the WIDS spoof SSID profile office.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] wids-spoof-profile name office
[HUAWEI-wlan-wids-spoof-office]
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123280

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next