No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wds-whitelist-profile (AP group radio view or AP radio view)

wds-whitelist-profile (AP group radio view or AP radio view)


The wds-whitelist-profile command binds a WDS whitelist profile to an AP radio.

The undo wds-whitelist-profile command unbinds a WDS whitelist profile from an AP radio.

By default, no WDS whitelist profile is bound to an AP radio.


wds-whitelist-profile whitelist-name

undo wds-whitelist-profile






Specifies the name of the WDS whitelist profile bound to an AP radio.

The WDS whitelist profile must exist.


AP group radio view, AP radio view

Default Level

2: Configuration level

Usage Guidelines

After a WDS whitelist profile is applied to an AP radio, the AP radio can only set up WDS links with neighboring APs whose MAC addresses are in the WDS whitelist profile. If no WDS whitelist profile is bound to an AP radio, the AP radio can establish WDS links with any neighboring APs.

On a WDS network, a root or middle node controls subnode access by MAC addresses added to the WDS whitelist profile. However, a leaf node does not require a whitelist.

An AP radio can only have one WDS whitelist profile bound. If you run the command multiple times on the same AP radio, the latest configuration overwrites the old one.


# Create the WDS whitelist profile whitelist and add the MAC address 0001-0001-0001 to the whitelist profile. Bind the WDS whitelist profile whitelist to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wds-whitelist-profile name whitelist
[HUAWEI-wlan-wds-whitelist-whitelist] peer-ap mac 0001-0001-0001
[HUAWEI-wlan-wds-whitelist-whitelist] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] radio 0
[HUAWEI-wlan-group-radio-group1/0] wds-whitelist-profile whitelist
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127772

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next