No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-load-balance dynamic steer-restrict restrict-time

sta-load-balance dynamic steer-restrict restrict-time

Function

The sta-load-balance dynamic steer-restrict restrict-time command sets the duration with which non-target APs suppress association of STAs during migration of the STAs.

The undo sta-load-balance dynamic steer-restrict restrict-time command restores the default duration with which non-target APs suppress association of STAs during migration of the STAs.

By default, the duration with which non-target APs suppress association of STAs during migration of the STAs is 5 seconds.

Format

sta-load-balance dynamic steer-restrict restrict-time restrict-time

undo sta-load-balance dynamic steer-restrict restrict-time

Parameters

Parameter

Description

Value

restrict-time

Specifies the duration with which non-target APs suppress association of STAs during migration of the STAs.

The value is an integer that ranges from 0 to 10, in seconds.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a STA is triggered to migrate to a specified target AP, non-target APs will suppress association of the STA temporarily to improve the STA's migration success rate. You can run the sta-load-balance dynamic steer-restrict restrict-time command to set the duration with which non-target APs suppress association of STAs during migration of the STAs.

Precautions

You can set a larger value of this parameter to improve the STA migration success rate, which, however, may affect users' network experience.

The default value is applicable to mainstream STAs. You are advised to retain the default value. If users' service experience deteriorates due to STA migration, set a smaller value for this parameter.

This command is valid only in sta-number mode.

Example

# Set the duration with which non-target APs suppress association of STAs during migration of the STAs to 4 seconds in RRM profile default.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] sta-load-balance dynamic steer-restrict restrict-time 4
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116983

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next