No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wapi key-update

wapi key-update

Function

The wapi key-update command sets the USK and MSK update mode.

The undo wapi key-update command restores the default USK and MSK update mode.

By default, USKs and MSKs are updated based on time.

Format

wapi { usk | msk } key-update { disable | time-based }

undo wapi { usk | msk } key-update

Parameters

Parameter

Description

Value

usk

Indicates USK update.

-

msk

Indicates MSK update.

-

disable

Disables key update.

-

time-based

Indicates time-based update.

You can run the wapi msk and wapi usk commands to respectively set the intervals for updating an MSK and a USK.

-

Views

Security profile view

Default Level

2: Configuration level

Usage Guidelines

  • To ensure network security, update keys in a timely manner. There are several key update modes.
  • The wapi key-update command sets the USK and MSK update mode. If the interval for updating an MSK or a USK is too long , key security cannot be ensured.
  • If disable is specified, keys will not be updated.

Example

# Set the USK update mode to time-based update.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] security-profile name p1
[HUAWEI-wlan-sec-prof-p1] wapi usk key-update time-based
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115362

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next