No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
member (static load balancing group view)

member (static load balancing group view)

Function

The member command adds an AP radio to a static load balancing group.

The undo member command deletes an AP radio from a load balancing group.

By default, no AP radio is added to a static load balancing group.

Format

member { { ap-name ap-name | ap-id ap-id } [ radio radio-id ] }&<1-8>

undo member { { ap-name ap-name | ap-id ap-id } [ radio radio-id ] }&<1-8>

Parameters

Parameter

Description

Value

ap-name ap-name

Specifies the name of an AP. The AP name and radio ID identify a radio.

The AP name must exist.
ap-id ap-id

Specifies the ID of an AP. The AP ID and radio ID identify a radio.

The AP ID must exist.

radio radio-id

Specifies a radio ID. The radio ID and AP name identify a radio.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AP4030TN, AP4051TN, and AP8050TN-HD.

Views

Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can use this command to add an AP radio to or delete an AP radio from a static load balancing group. When a STA requests to connect to an AP radio in a static load balancing group, the AC compares the load of the radio and other working radios in the load balancing group and determines whether to allow the STA to connect to the radio according to a load balancing algorithm.

Precautions

  • If dual-band APs are used, traffic is load balanced among APs working on the same frequency band.
  • Each load balancing group supports a maximum of 16 AP radios.
  • Under the agile distributed network architecture composed of the central AP and RUs, you only need to add radios of the RUs to a static load balancing group.
  • A radio configured with channel 184, 188, 192, or 196 on the 4.9 GHz frequency band cannot be used for load balancing.

Example

# Add radio 0 of AP office to the static load balancing group coco.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] sta-load-balance static-group name coco
[HUAWEI-wlan-sta-lb-static-coco] member ap-name office radio 0    
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124748

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next