No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wifi-light

wifi-light

Function

The wifi-light command specifies the parameter reflected by the blinking frequency of the Wireless LED on an AP.

The undo wifi-light command restores the default parameter reflected by the blinking frequency of the Wireless LED on an AP.

By default,
  • If the Mesh function is enabled on the AP, the blinking frequency of the Wireless LED reflects the weakest signal strength of all neighboring APs.
  • If WDS is enabled on an AP, the blinking frequency of the Wireless LED reflects the strength of signals received from a WDS AP.
    • If the AP works in leaf mode, the blinking frequency of the Wireless LED reflects the strength of signals received from a middle AP.
    • If the AP works in middle mode, the blinking frequency of the Wireless LED reflects the strength of signals received from a root AP.
    • If the AP works in root mode, the blinking frequency of the Wireless LED reflects the weakest signal strength of middle APs.
  • If the WDS and Mesh functions are disabled on an AP, the blinking frequency of the Wireless LED reflects the service traffic volume on the radio.
NOTE:

Only APs having wireless LEDs support this command. To determine whether an AP has the Wireless LED, check the section Indicator Description in the Hardware Installation and Maintenance Guide of the corresponding AP model.

Format

wifi-light { signal-strength | traffic }

undo wifi-light

Parameters

Parameter

Description

Value

signal-strength

Sets the parameter reflected by the blinking frequency of the Wireless LED on an AP to signal strength. When the Wireless LED blinks fast, the signal strength is strong.

-

traffic

Sets the parameter reflected by the blinking frequency of the Wireless LED on an AP to service traffic volume. When the Wireless LED blinks fast, the service traffic volume is high.

-

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

During installation and commissioning of an AP that has the WDS or Mesh function enabled, you need to adjust AP locations and antenna directions to obtain strong signals. If the blinking frequency of the Wireless LED shows the signal strength, onsite installation personnel can know the signal strength in real time. The wifi-light command allows you to specify the parameter reflected by the blinking frequency of the Wireless LED. For example, you can specify the parameter to signal strength during installation and service traffic volume after installation.

Precautions

This command takes effect only when the AP has the WDS or Mesh function enabled. If the WDS and Mesh functions are disabled on the AP, the Wireless LED always shows service traffic volume.

Example

# Set the parameter reflected by the blinking frequency of the Wireless LED on an AP to service traffic volume.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name radio-profile1
[HUAWEI-wlan-radio-2g-prof-radio-profile1] wifi-light traffic
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116899

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next