No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display rrm-profile

display rrm-profile

Function

The display rrm-profile command displays information about an RRM profile.

Format

display rrm-profile { all | name profile-name }

Parameters

Parameter Description Value
all

Displays information about all RRM profiles.

-

name profile-name

Displays information about a specified RRM profile.

The RRM profile name must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view information about an RRM profile.

Example

# Display information about all RRM profiles.

<HUAWEI> display rrm-profile all
------------------------------------------------------------
Profile name  Reference
------------------------------------------------------------
default       2
------------------------------------------------------------
Total:1
Table 11-118  Description of the display rrm-profile all command output
Item Description

Profile name

Name of an RRM profile.

Reference

Number of times an RRM profile is referenced.

# Display information about the RRM profile huawei.

<HUAWEI> display rrm-profile name huawei
--------------------------------------------------------------------            
PER threshold for trigger channel/power select(%)            : 60               
Noise-floor threshold for trigger channel/power select(dBm)  : -75              
Calibrate tpc threshold(dBm):                                : -60              
Calibrate maximum TX power(dBm)                              : 127              
Calibrate minimum TX power(dBm)                              : 9                
Calibrate error rate check interval(min)                     : 1                
Calibrate error rate check traffic threshold(kbps)           : 1250             
Airtime fairness schedule                                    : disable          
Dynamic adjust EDCA parameter                                : disable          
Dynamic EDCA be-service threshold                            : 6 
UAC check client's SNR                                       : disable          
UAC client's SNR threshold(dB)                               : 20               
UAC check client number                                      : disable          
UAC client number access threshold                           : 64               
UAC client number roam threshold                             : 64               
UAC check channel utilization                                : disable          
UAC channel utilization access threshold(%)                  : 80               
UAC channel utilization roam threshold(%)                    : 80               
Action upon reaching the UAC threshold                       : SSID broadcast 
Band steer deny threshold                                    : 0                
Band steer SNR threshold(dB)                                 : 20               
Band balance start threshold                                 : 100              
Band balance gap threshold(%)                                : 20               
Client's band expire based on continuous probe counts        : 35               
Station load balance                                         : disable          
Station load balance mode                                    : sta-number       
Station load balance deny threshold                          : 3                
Station load balance RSSI threshold(dBm)                     : -70              
Station load balance RSSI-diff-gap threshold(dBm)            : 20 
Station load balance sta-number start threshold              : 10               
Station load balance sta-number gap threshold(percentage)    : 20               
Station load balance sta-number gap threshold(number)        : -                
Station load balance channel-utilization start threshold(%)  : 50               
Station load balance channel-utilization gap threshold(%)    : 20               
Station load balance deauth fail times                       : 2                
Station load balance BTM fail times                          : 5                
Station load balance steer-restrict restrict time(s)         : 5                
Station load balance steer-restrict probe threshold          : 5                
Station load balance steer-restrict auth  threshold          : 0                
Station load balance probe-report interval(s)                : 30      
Smart-roam                                                   : enable           
Smart-roam quick kickoff                                     : enable           
Smart-roam check SNR                                         : enable           
Smart-roam quick kickoff check SNR                           : enable           
Smart-roam check rate                                        : disable          
Smart-roam quick kickoff check rate                          : disable          
Smart-roam standing SNR threshold(dB)                        : 20               
Smart-roam SNR quick-kickoff-threshold(dB)                   : 15               
Smart-roam rate threshold(%)                                 : 20               
Smart-roam rate quick-kickoff-threshold(%)                   : 20               
Smart-roam high level SNR margin(dB)                         : 15               
Smart-roam low level SNR margin(dB)                          : 6                
Smart-roam SNR check interval(s)                             : 3                
Smart-roam unable roam client expire time(min)               : 120              
Smart-roam quick-kickoff SNR check interval(ms)              : 500              
Smart-roam quick-kickoff SNR P-N observe time                : 6                
Smart-roam quick-kickoff SNR P-N qualify time                : 4                
Smart-roam advanced scan                                     : enable           
Smart-roam quick-kickoff back off time                       : 60               
AMC policy                                                   : auto-balance     
High density AMC optimize                                    : disable          
SFN roam check high threshold(dBm)                           : -55              
SFN roam check low threshold(dBm)                            : -60              
SFN roam check interval(ms)                                  : 700              
SFN roam report interval(ms)                                 : 400              
SFN roam check rssi-accumulate threshold(dB)                 : 8                
SFN roam check sta-holding times                             : 3                
SFN roam check gap-rssi(dB)                                  : 6                
SFN roam check better-times                                  : 2                
DFS smart select                                             : enable           
DFS recover delay time(min)                                  : 0                
Multimedia air optimize                                      : disable          
Multimedia air optimize threshold                                               
  Voice                                                      : 30               
  Video                                                      : 100              
--------------------------------------------------------------------            
Table 11-119  Description of the display rrm-profile name command output

Item

Description

PER threshold for trigger channel/power select(%)

PER threshold for triggering channel or power adjustment.

To configure this parameter, run the calibrate error-rate-threshold command.

Noise-floor threshold for trigger channel/power select(dBm)

Noise-floor threshold for triggering channel or power adjustment.

To configure this parameter, run the calibrate noise-floor-threshold command.

Calibrate tpc threshold(dBm)

Transmit Power Control (TPC) coverage threshold.

To configure this parameter, run the calibrate tpc threshold command.

Calibrate maximum TX power(dBm)

Maximum transmit power that can be adjusted through radio calibration.

To configure this parameter, run the calibrate max-tx-power command.

Calibrate minimum TX power(dBm)

Minimum transmit power that can be adjusted through radio calibration.

To configure this parameter, run the calibrate min-tx-power command.

Calibrate error rate check interval(min)

Interval for checking the BER.

To configure this parameter, run the calibrate error-rate-check command.

Calibrate error rate check traffic threshold(kbps)

Traffic threshold for checking the BER.

To configure this parameter, run the calibrate error-rate-check command.

Airtime fairness schedule

Whether to enable airtime fair scheduling.

To configure this parameter, run the airtime-fair-schedule enable command.

Dynamic adjust EDCA parameter

Whether to enable dynamic EDCA parameter adjustment.

To configure this parameter, run the dynamic-edca enable command.

Dynamic EDCA be-service threshold

Threshold for the dynamic EDCA Best-Effort service.

To configure this parameter, run the dynamic-edca threshold command.

UAC check client's SNR

Whether to enable user CAC based on terminal SNR.

To configure this parameter, run the uac enable command.

UAC client's SNR threshold(dB)

User CAC SNR threshold.

To configure this parameter, run the uac client-snr threshold command.

UAC check client number

Whether to enable user CAC based on the number of users.

To configure this parameter, run the uac enable command.

UAC client number access threshold

User CAC access threshold based on the number of users.

To configure this parameter, run the uac client-number threshold command.

UAC client number roam threshold

User CAC roaming threshold based on the number of users.

To configure this parameter, run the uac client-number threshold command.

UAC check channel utilization

Whether to enable user CAC based on the channel usage.

To configure this parameter, run the uac enable command.

UAC channel utilization access threshold(%)

User CAC access threshold based on the channel usage.

To configure this parameter, run the uac channel-utilization threshold command.

UAC channel utilization roam threshold(%)

User CAC roaming threshold based on the channel usage.

To configure this parameter, run the uac channel-utilization threshold command.

Action upon reaching the UAC threshold

Action to take when the number of access users reaches the user CAC threshold.
  • SSID hide: hiding the SSID
  • SSID broadcast: broadcasting the SSID
  • priority-based user replacement: allowing access of VIP users instead of non-VIP users based on priorities

To configure this parameter, run the uac reach-access-threshold command.

Band steer deny threshold

Maximum number of times an AP rejects association requests of a STA for band steering.

To configure this parameter, run the band-steer deny-threshold command.

Band steer SNR threshold(dB)

Start SNR threshold for triggering 5G-prior access.

To configure this parameter, run the band-steer snr-threshold command.

Band balance start threshold

Start threshold for load balancing between radios.

To configure this parameter, run the band-steer balance start-threshold command.

Band balance gap threshold(%)

Load difference threshold for load balancing between radios.

To configure this parameter, run the band-steer balance gap-threshold command.

Client's band expire based on continuous probe counts

Aging condition of terminal band information, that is, the number of times that an AP has continuously received Probe frames of a terminal from the same frequency band.

To configure this parameter, run the band-steer client-band-expire command.

Station load balance

Whether to enable the load balancing function.

To configure this parameter, run the sta-load-balance dynamic disable command.

Station load balance mode

Dynamic load balancing mode.
  • channel-utilization: dynamic load balancing based on the channel usage
  • sta-number: dynamic load balancing based on the number of users.

To configure this parameter, run the sta-load-balance mode command.

Station load balance deny threshold

Maximum number of times an AP rejects association requests of a STA for dynamic load balancing.

To configure this parameter, run the sta-load-balance dynamic deny-threshold command.

Station load balance RSSI threshold(dBm)

RSSI threshold for member devices in a dynamic load balancing group.

To configure this parameter, run the sta-load-balance dynamic rssi-threshold command.

Station load balance RSSI-diff-gap threshold(dBm)

RSSI difference threshold of members in a static load balancing group.

To configure this parameter, run the rssi-diff-gap command.

Station load balance sta-number start threshold

Start threshold for dynamic load balancing based on the number of users.

To configure this parameter, run the sta-load-balance dynamic sta-number start-threshold command.

Station load balance sta-number gap threshold(percentage)

Load difference threshold for dynamic load balancing based on the percentage of users.

To configure this parameter, run the sta-load-balance dynamic sta-number gap-threshold command.

Station load balance sta-number gap threshold(number)

Load difference threshold for static load balancing based on the number of users.

To configure this parameter, run the sta-load-balance dynamic sta-number gap-threshold command.

Station load balance channel-utilization start threshold(%)

Start threshold for dynamic load balancing based on the channel usage.

To configure this parameter, run the sta-load-balance dynamic channel-utilization start-threshold command.

Station load balance channel-utilization gap threshold(%)

Load difference threshold for dynamic load balancing based on the channel usage.

To configure this parameter, run the sta-load-balance dynamic channel-utilization gap-threshold command.

Station load balance deauth fail times

Maximum number of attempts to migrate STAs in deauthentication mode.

To configure this parameter, run the sta-load-balance dynamic deauth-fail-times command.

Station load balance BTM fail times

Maximum number of attempts to migrate STAs in BTM mode.

To configure this parameter, run the sta-load-balance dynamic btm-fail-times command.

Station load balance steer-restrict restrict time(s)

Duration within which non-target APs suppress association of STAs during migration of the STAs.

To configure this parameter, run the sta-load-balance dynamic steer-restrict restrict-time command.

Station load balance steer-restrict probe threshold

Maximum number of times non-target APs perform probe suppression for STAs during migration of the STAs.

To configure this parameter, run the sta-load-balance dynamic steer-restrict probe-threshold command.

Station load balance steer-restrict auth threshold

Maximum number of times non-target APs suppress authentication of STAs during migration of the STAs.

To configure this parameter, run the sta-load-balance dynamic steer-restrict auth-threshold command.

Station load balance probe-report interval(s)

Interval for reporting Probe frames.

To configure this parameter, run the sta-load-balance dynamic probe-report interval command.

Smart-roam

Whether to enable smart roaming.

To configure this parameter, run the smart-roam disable command.

Smart-roam quick kickoff

Whether to enable the function of quickly disconnecting STAs.

To configure this parameter, run the smart-roam quick-kickoff-threshold disable command.

Smart-roam check SNR

Whether to specify the trigger mode of smart roaming as check SNR.

To configure this parameter, run the smart-roam roam-threshold { check-snr | check-rate } command.

Smart-roam quick kickoff check SNR

Whether to enable the function of quickly disconnecting STAs is triggered by checking the SNR of STAs.

To configure this parameter, run the smart-roam quick-kickoff-threshold { check-snr | check-rate } command.

Smart-roam check rate

Whether to specify the trigger mode of smart roaming as check rate.

To configure this parameter, run the smart-roam roam-threshold { check-snr | check-rate } command.

Smart-roam quick kickoff check rate

Whether to enable the function of quickly disconnecting STAs is triggered by checking the rate of STAs.

To configure this parameter, run the smart-roam quick-kickoff-threshold { check-snr | check-rate } command.

Smart-roam standing SNR threshold(dB)

SNR threshold for smart roaming.

To configure this parameter, run the smart-roam roam-threshold { snr | rate } command.

Smart-roam SNR quick-kickoff-threshold(dB)

SNR-based threshold for quickly disconnecting STAs.

To configure this parameter, run the smart-roam quick-kickoff-threshold command.

Smart-roam rate threshold(%)

Rate threshold for smart roaming.

To configure this parameter, run the smart-roam roam-threshold { snr | rate } command.

Smart-roam rate quick-kickoff-threshold(%)

Rate-based threshold for quickly disconnecting STAs.

To configure this parameter, run the smart-roam quick-kickoff-threshold command.

Smart-roam high level SNR margin(dB)

Higher SNR difference threshold that triggers terminal roaming.

To configure this parameter, run the smart-roam snr-margin command.

Smart-roam low level SNR margin(dB)

Lower SNR difference threshold that triggers terminal roaming.

To configure this parameter, run the smart-roam snr-margin command.

Smart-roam SNR check interval(s)

Terminal SNR check interval.

To configure this parameter, run the smart-roam quick-kickoff-snr check-interval command.

Smart-roam unable roam client expire time(min)

Aging time of "unable to roam" record.

To configure this parameter, run the smart-roam unable-roam-client expire-time command.

Smart-roam quick-kickoff SNR check interval(ms)

Interval for checking the SNR to determine whether to quickly disconnect STAs.

To configure this parameter, run the smart-roam quick-kickoff-snr check-interval command.

Smart-roam quick-kickoff SNR P-N observe time

Number of PN observation times to determine whether to quickly disconnect STAs.

To configure this parameter, run the smart-roam quick-kickoff-snr p-n criteria command.

Smart-roam quick-kickoff SNR P-N qualify time

Number of times criteria are met to determine whether to quickly disconnect STAs.

To configure this parameter, run the smart-roam quick-kickoff-snr p-n criteria command.

Smart-roam advanced scan

Whether coordinated scanning function of smart roaming is enabled.

To configure this parameter, run the smart-roam advanced-scan disable command.

Smart-roam quick-kickoff back off time

Backoff time for quickly disconnecting STAs.

To configure this parameter, run the smart-roam quick-kickoff back-off-time command.

AMC policy

Adaptive modulation and coding (AMC) algorithm.

To configure this parameter, run the amc-policy command.

High density AMC optimize

Whether to enable the AMC optimization function in high-density scenarios.

To configure this parameter, run the high-density amc-optimize enable command.

SFN roam check high threshold(dBm)

Upper RSSI threshold for agile distributed SFN roaming.

To configure this parameter, run the sfn-roam roam-check high-threshold command.

SFN roam check low threshold(dBm)

Lower RSSI threshold for agile distributed SFN roaming.

To configure this parameter, run the sfn-roam roam-check low-threshold command.

SFN roam check interval(ms)

Decision period for agile distributed SFN roaming.

To configure this parameter, run the sfn-roam roam-check check-interval command.

SFN roam report interval(ms)

Interval for RUs to report the STA RSSI.

To configure this parameter, run the sfn-roam report-interval command.

SFN roam check rssi-accumulate threshold(dB)

Cumulative RSSI change threshold for agile distributed SFN roaming.

To configure this parameter, run the sfn-roam roam-check rssi-accumulate command.

SFN roam check sta-holding times

Number of STA holding times for agile distributed SFN roaming.

To configure this parameter, run the sfn-roam roam-check sta-holding times command.

SFN roam check gap-rssi(dB)

RSSI gap for agile distributed SFN roaming RUs.

To configure this parameter, run the sfn-roam roam-check gap-rssi command.

SFN roam check better-times

Number of times the RSSI of agile distributed SFN roaming RUs is higher than that of the local RU.

To configure this parameter, run the sfn-roam roam-check better-times command.

DFS smart select

Whether to enable DFS smart selection.
  • enable: DFS smart selection is enabled.
  • disable: DFS smart selection is disabled.

To configure this parameter, run the dfs smart-selection disable command.

DFS recover delay time(min)

Delay in switching back the DFS channel.

To configure this parameter, run the dfs recover-delay command.

Multimedia air optimize
Whether the multimedia air interface optimization function is enabled.
  • disable: This function is disabled.
  • enable: This function is enabled.

To configure this parameter, run the multimedia-air-optimize enable command.

Multimedia air optimize threshold
User packet density threshold for triggering multimedia air interface optimization.
  • Voice: voice packet density threshold
  • Video: video packet density threshold

To configure this parameter, run the multimedia-air-optimize threshold command.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 112835

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next