No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap update multi-load

ap update multi-load

Function

The ap update multi-load command upgrades APs of the same type in batches.

The undo ap update multi-load command cancels batch upgrade of APs with the same type.

Format

ap update multi-load ap-type type-id [ ap-group group-name | { ap-name ap-name | ap-id ap-id } &<1-10> ]

ap update multi-load ap-group group-name [ { ap-name ap-name } &<1-10> | { ap-id ap-id } &<1-10> ]

undo ap update multi-load ap-type type-id [ ap-group group-name | { ap-name ap-name | ap-id ap-id } &<1-10> ]

undo ap update multi-load ap-group group-name [ { ap-name ap-name } &<1-10> | { ap-id ap-id } &<1-10> ]

Parameters

Parameter

Description

Value

ap-type type-id

Specifies the AP type ID.

The value is an integer that ranges from 0 to 255.

ap-group group-name

Specifies an AP group.

The AP group must exist.

ap-name ap-name

Specifies an AP name.

The AP name must exist.

ap-id ap-id

Specifies an AP ID.

The AP ID must exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can run the ap update multi-load ap-type type-id [ ap-group group-name | { ap-name ap-name | ap-id ap-id } &<1-10> ] command to upgrade APs of the same type in batches in the online upgrade mode.
  • If ap-group group-name is specified, only APs of the same type and in the specified AP group are upgraded.
  • If ap-name ap-name or ap-id ap-id is specified, only APs of the specified type and with the specified AP name or AP ID are upgraded
  • If none of the ap-group group-name, ap-name ap-name, and ap-id ap-id parameters are specified, all APs of the specified type are upgraded.
  • If the type of APs specified by ap-group group-name, ap-name ap-name, or ap-id ap-id is different from ap-type type-id, the APs cannot be upgraded.
You can run the ap update multi-load ap-group group-name [ { ap-name ap-name } &<1-10> | { ap-id ap-id } &<1-10> ] command to batch upgrade APs in the specified AP group online.
  • If ap-name ap-name or ap-id ap-id is specified, only APs with the specified name or ID in the specified AP group are upgraded.

  • If neither ap-name ap-name nor ap-id ap-id is specified, all APs in the specified AP group are upgraded.

  • If APs specified by ap-name ap-name and ap-id ap-id are in different AP groups, the APs cannot be upgraded.

Prerequisites

AP upgrade files have been configured in batches using the ap update update-filename command.

Follow-up Procedure

Run the ap update multi-reset command to reset APs in batches to make AP upgrade take effect.

Precautions

The undo ap update multi-load ap-type type-id command cancels batch upgrade of APs with the same type. However, if the AP system software has been written to the flash memory during the upgrade, the command does not take effect. You can run the display ap update status all command to check AP upgrade progress.

Example

# Upgrade APs with type-id 19 in batches online.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap update multi-load ap-type 19
Info: The current upgrade mode is AC mode, which may affect performance and take a long time. The FTP or SFTP upgrade mode is recomm
ended. Continue? [Y/N]:y
# Upgrade all APs in AP group ap-group1 in batches online.
<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap update multi-load ap-group ap-group1
Info: The current upgrade mode is AC mode, which may affect performance and take a long time. The FTP or SFTP upgrade mode is recomm
ended. Continue? [Y/N]:y
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115498

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next