No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
steer-restrict auth-threshold

steer-restrict auth-threshold

Function

The steer-restrict auth-threshold command sets the maximum number of times non-target APs suppress authentication of STAs during migration of the STAs.

The undo steer-restrict auth-threshold command restores the default maximum number of times non-target APs suppress authentication of STAs during migration of the STAs.

By default, the maximum number of times non-target APs suppress authentication of STAs during migration of the STAs is 0.

Format

steer-restrict auth-threshold auth-threshold

undo steer-restrict auth-threshold

Parameters

Parameter

Description

Value

auth-threshold

Specifies the maximum number of times non-target APs suppress authentication of STAs during migration of the STAs.

The value is an integer that ranges from 0 to 5.

Views

Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a STA is triggered to migrate to a specified target AP, non-target APs will suppress association of the STA temporarily to improve the STA's migration success rate. You can run the sta-load-balance dynamic steer-restrict auth-threshold command to set the maximum number of times non-target APs suppress authentication of STAs during migration of the STAs.

Precautions

You can set a larger value of this parameter to improve the STA migration success rate, which, however, may affect users' network experience.

The default value is applicable to mainstream STAs. You are advised to retain the default value. If users' service experience deteriorates due to STA migration, set a smaller value for this parameter.

This command is valid only in sta-number mode.

Example

# Set the maximum number of times non-target APs suppress authentication of STAs during migration of the STAs to 1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-load-balance static-group name coco
[HUAWEI-wlan-sta-lb-static-coco] steer-restrict auth-threshold 1
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115527

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next