No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap asyn-message err-info

display ap asyn-message err-info

Function

The display ap asyn-message err-info command displays records about AP restart failures.

Format

display ap asyn-message err-info { all | ap-name ap-name | ap-id ap-id }

Parameters

Parameter

Description

Value

all

Displays records about restart failures of all APs.

-

ap-name ap-name

Displays records about restart failures of the AP with a specified name.

The AP name must exist.

ap-id ap-id

Displays records about restart failures of the AP with a specified ID.

The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

When you use commands on the AC to restart an AP manually, during an upgrade, or to restore its factory settings, the restart message delivered by the AC may get lost due to transmission failures. Therefore, APs are not restarted. If an AP does not receive the restart message, the AP is still connected to the AC, which makes the AC incorrectly consider that the AP is restarted successfully. This command displays records about AP restart failures, helping you check whether the AP is restarted successfully. If the AP restart fails, restart the AP.

Example

# Display records about restart failures of all APs.

<HUAWEI> display ap asyn-message err-info all
------------------------------------------------------------------------------  
AP Name MAC            Time                    Reason                           
------------------------------------------------------------------------------  
hw1     dcd2-fcf4-6600 2015-1-19 14:41:59      update
hw2     dcd2-fcf4-8800 2015-1-19 14:45:56      clear config
------------------------------------------------------------------------------  
Total: 2 
Table 11-7  Description of the display ap asyn-message err-info command output

Item

Description

AP Name

Name of an AP.

MAC

MAC address of an AP.

Time

Time when AP restart fails.

Reason

Type of AP restart failures.
  • update: The AP fails to be restarted during an upgrade.
  • clear config: The AP fails to be restarted when restoring factory settings.
  • other: The AP fails to be restarted manually.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116708

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next