No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
channel-utilization start-threshold

channel-utilization start-threshold

Function

The channel-utilization start-threshold command sets the start threshold for static load balancing based on the channel usage.

The undo channel-utilization start-threshold command restores the default start threshold for static load balancing based on the channel usage.

By default, the start threshold for static load balancing based on the channel usage is 50%.

Format

channel-utilization start-threshold start-threshold

undo channel-utilization start-threshold

Parameters

Parameter

Description

Value

start-threshold start-threshold

Specifies the start threshold for static load balancing based on the channel usage.

The value is an integer that ranges from 1 to 99, in percentage.

Views

Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the start threshold is configured for static load balancing based on the channel usage, an AP calculates the channel usage of the radio with which a STA associates when the STA requests to connect to the AP. If the channel usage does not exceed the start threshold, the STA access is permitted. If the channel usage exceeds the start threshold, the AP calculates the load difference for static load balancing based on the channel usage. You can run the channel-utilization gap-threshold command to configure the load difference threshold for static load balancing based on the channel usage.

Example

# Set the start threshold for static load balancing based on the channel usage to 60%.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-load-balance static-group name coco
[HUAWEI-wlan-sta-lb-static-coco] channel-utilization start-threshold 60
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116860

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next