No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display spectrum-analysis server-reporter

display spectrum-analysis server-reporter

Function

The display spectrum-analysis server-reporter command displays a list of APs that report spectrum packets to the spectrum server.

Format

display spectrum-analysis server-reporter

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display spectrum-analysis server-reporter command displays a list of APs that report spectrum packets to the spectrum server.

Example

# Display all APs that report spectrum packets to the spectrum server.

<HUAWEI> display spectrum-analysis server-reporter
------------------------------------------------------------
ID    AP name                          Radio ID
------------------------------------------------------------
1     AP_1                             0
------------------------------------------------------------
Total: 1
Table 11-131  Description of the display spectrum-analysis server-reporter command output

Item

Description

ID

ID of the AP that reports spectrum data.

To configure the AP name, run the spectrum-report command.

AP name

Name of the AP that reports spectrum data.

To configure the AP name, run the spectrum-report command.

Radio ID

ID of the radio on which the function of reporting spectrum data is enabled.

To set the radio ID, run the spectrum-report command.

Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114157

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next