No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap-mode

ap-mode

Function

The ap-mode command sets the working mode of an AP.

The undo ap-mode command restores the default working mode of an AP.

By default, an AP works in Fit mode.

Format

ap-mode { fat | cloud }

undo ap-mode

Parameters

Parameter Description Value
fat Specifies the Fat mode. -
cloud Specifies the cloud mode. -

Views

AP provisioning view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The working mode of an AP is configured on the AC and delivers to the AP. After a restart, the AP will switch the working mode accordingly.

Prerequisites

  • The AP has gone online on the AC in Fit mode.
  • Corresponding system files have been uploaded to the AC, FTP server, or SFTP server.

Follow-up Procedure

Run the commit command to commit the configuration.

Configuration Impact

After the working mode of the AP is switched to Fat or cloud, the AP will be out of control by the AC.

Only the AP2051DN, AP2051DN-E, AP1050DN-S, AP2050DN, P2051DN-L-S, AP4050DE-B-S, AP3050DE, AP4050DE-M-S, AP4050DE-M, AP7060DN, AP5510-W-GP, AP2050DN-E, AP4050DN-E, AP4050DN-HD, AP4050DN, AP4050DN-S, AP4051DN, AP4151DN, AP8050DN, AP8050DN-S, AP8150DN, AP4051TN, AP6052DN, AP7052DN, AP7152DN, AP7052DE, AP8050TN-HD, AP8082DN, AP8182DN, AP6050DN, AP6150DN, AP7050DN-E, AP7050DE, AP8030DN, AP8130DN, AD9430DN-12, and AD9430DN-24 support this command. The AP4030TN and AD9431DN-24X can be switched only to the Fat mode.

Example

# Set the working mode of an AP to Fat.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] provision-ap
[HUAWEI-wlan-provision-ap] ap-mode fat
Warning: When the configuration is committed, the AP mode will be switched if supported and the AP will be out of control by the AC.Continue?[Y/N]: y
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126393

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next