No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
band-steer balance start-threshold

band-steer balance start-threshold

Function

The band-steer balance start-threshold command sets the start threshold for the number of STAs that preferentially access the 5 GHz radio during band steering.

The undo band-steer balance start-threshold command restores the default start threshold for the number of STAs that preferentially access the 5 GHz radio during band steering.

By default, the start threshold for the number of STAs that preferentially access the 5 GHz radio during band steering is 100.

Format

band-steer balance start-threshold start-threshold

undo band-steer balance start-threshold

Parameters

Parameter

Description

Value

start-threshold start-threshold

Specifies the start threshold for the number of STAs that preferentially access the 5 GHz radio during band steering.

The value is an integer that ranges from 0 to 100.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

On a multi-radio AP, if access STAs support multiple frequency bands, the band steering function configured using the undo band-steer disable command can preferentially steer STAs to the 5 GHz radio.

When a STA requests to connect to an AP radio, the AP enabled with band steering will collect statistics about access STAs on each radio.
  1. If the number of access STAs on the AP does not exceed the start threshold, the STA can preferentially associate with the 5 GHz radio.
  2. If the number of access STAs exceeds the value specified by the start threshold, the AP calculates the percentage of access STAs on the 5 GHz radio using the formula: (number of access STAs on the 5 GHz radio/total number of access STAs) x 100%. If the percentage exceeds the percentage threshold for access STAs on the 5 GHz radio configured using the band-steer balance gap-threshold command, the STA randomly selects a frequency band.
NOTE:

You are advised to retain the default values of the start and percentage thresholds for the number of STAs preferentially accessed on the 5 GHz radio. If the two thresholds are set low, the AP may allow STAs to freely select the access frequency band when only the number of STAs on the 5 GHz radio is small. As a result, the 5G-prior access mechanism does not take effect, and the 5 GHz band utilization cannot be maximized.

Example

# Set the start threshold to 90 in the RRM profile huawei.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name huawei
[HUAWEI-wlan-rrm-prof-huawei] band-steer balance start-threshold 90
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 117218

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next