No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display radio-5g-profile

display radio-5g-profile

Function

The display radio-5g-profile command displays configuration and reference information about a 5G radio profile.

Format

display radio-5g-profile { all | name profile-name }

Parameters

Parameter

Description

Value

all

Displays information about all 5G radio profiles.

-

name profile-name

Displays information about a specified 5G radio profile.

The 5G radio profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view configuration and reference information about a 5G radio profile.

Example

# Display information about all 5G radio profiles.

<HUAWEI> display radio-5g-profile all
----------------------------------------------------------
Profile name                   Reference
----------------------------------------------------------
default                        1
----------------------------------------------------------
Total: 1
Table 11-65  Description of the display radio-5g-profile all command output

Item

Description

Profile name

Name of a 5G radio profile.

Reference

Number of times a 5G radio profile is referenced.

# Display information of the 5G radio profile default.

<HUAWEI> display radio-5g-profile name default
------------------------------------------------------------                    
Radio type                             : 802.11ac
Power auto adjust                      : disable                                
Beacon interval(TUs)                   : 100                                    
Beamforming switch                     : disable                                
Fragmentation threshold(Byte)          : 2346                                   
Channel switch announcement            : support                                
Channel switch mode                    : continue                               
Guard interval mode                    : normal                                 
802.11ax Guard interval mode           : dot8
HT A-MPDU switch                       : disable                                
HT A-MPDU length limit                 : 3                                      
VHT A-MPDU length limit                : 7                                      
VHT A-MSDU switch                      : disable                                
VHT A-MSDU Max frame number            : 2                                      
RTS-CTS-mode                           : CTS-TO-SELF                            
RTS-CTS-threshold                      : 2347                                   
802.11a basic rate                     : 6 12 24                                
802.11a support rate                   : 6 9 12 18 24 36 48 54                  
Multicast rate 5G                      : 6                                      
VHT mcs                                : 9 9 9 9 9 9 9 9                                  
Interference detect switch             : disable                                
Co-channel frequency interference threshold(%)        : 50                      
Adjacent-channel frequency interference threshold(%)  : 50                      
Station interference threshold         :32                                      
WMM switch                             : enable                                 
Mandatory switch                       : disable                                
Auto-off start time                    : -
Auto-off end time                      : -
WiFi-light mode                        : signal-strength                        
Utmost power switch                    : enable
Rrm-profile                            : default                                
Air-scan-profile                       : default                                
Smart-antenna                          : disable
Agile-antenna-polarization             : disable
CCA threshold(dBm)                     : -
High PER threshold(%)                           : 80
Low PER threshold(%)                            : 20
Training interval(s)                            : auto
Training mpdu num                               : 640
Throughput trigger training threshold (%)       : 10
------------------------------------------------------------                    
AP EDCA parameters:                                                             
------------------------------------------------------------
       ECWmax  ECWmin  AIFSN  TXOPLimit(32us)  Ack-Policy
AC_VO  3       2       1      47               normal
AC_VI  4       3       1      94               normal
AC_BE  6       4       3      0                normal
AC_BK  10      4       7      0                normal
------------------------------------------------------------
Table 11-66  Description of the display radio-5g-profile name command output

Item

Description

Radio type

Radio type.

To configure this parameter, run the radio-type (5G radio profile view) command.

Power auto adjust

Whether automatic per packet power adjustment is enabled.

To configure this parameter, run the power auto-adjust enable command.

Beacon interval(TUs)

Interval at which an AP sends Beacon frames, in TU.

To configure this parameter, run the beacon-interval command.

Beamforming switch

Whether the beamforming function is enabled.

To configure this parameter, run the beamforming enable command.

Fragmentation threshold(Byte)

Packet fragmentation threshold, in bytes.

To configure this parameter, run the fragmentation-threshold command.

Channel switch announcement

Whether channel switch announcement is enabled.

To configure this parameter, run the channel-switch announcement disable command.

Channel switch mode

Channel switch announcement mode.

To configure this parameter, run the channel-switch mode command.

Guard interval mode

802.11n/ac GI mode.

To configure this parameter, run the guard-interval-mode command.

802.11ax Guard interval mode

802.11ax GI mode.
  • dot8: 0.8us
  • 1dot6: 1.6us
  • 3dot2: 3.2us

To configure this parameter, run the guard-interval-mode command.

HT A-MPDU switch

Whether the MPDU aggregation function is enabled.

To configure this parameter, run the ht a-mpdu disable command.

HT A-MPDU length limit

Maximum length of the aggregated MPDU frame.

To configure this parameter, run the ht a-mpdu max-length-exponent command.

VHT A-MPDU length limit

Maximum length of the frame aggregated in A-MSDU mode.

To configure this parameter, run the vht a-mpdu max-length-exponent command.

VHT A-MSDU switch

Whether to enable the function of sending 802.11 packets in A-MSDU mode.

To configure this parameter, run the vht a-msdu enable command.

VHT A-MSDU Max frame number

Maximum number of subframes that can be aggregated into an A-MSDU.

To configure this parameter, run the vht a-msdu max-frame-num command.

RTS-CTS-mode

RTS/CTS mode.

To configure this parameter, run the rts-cts-mode command.

RTS-CTS-threshold

RTS/CTS threshold.

To configure this parameter, run the rts-cts-threshold command.

802.11a basic rate

802.11a basic rate set.

To configure this parameter, run the dot11a basic-rate command.

802.11a support rate

802.11a supported rate set.

To configure this parameter, run the dot11a supported-rate command.

Multicast rate 5G

Multicast rate of wireless packets on the 5 GHz radio.

To configure this parameter, run the multicast-rate command.

VHT mcs

Maximum MCS value corresponding to a specific number of 802.11ac spatial streams.

To configure this parameter, run the vht mcs-map command.

Interference detect switch

Whether interference detection is enabled.

To configure this parameter, run the interference detect-enable command.

Co-channel frequency interference threshold(%)

Alarm threshold for co-channel interference.

To configure this parameter, run the interference co-channel threshold command.

Adjacent-channel frequency interference threshold(%)

Alarm threshold for adjacent-channel interference.

To configure this parameter, run the interference adjacent-channel threshold command.

Station interference threshold

Alarm threshold for STA interference.

To configure this parameter, run the interference station threshold command.

WMM switch

Whether the WMM function is enabled.

To configure this parameter, run the wmm disable command.

Mandatory switch

Whether to allow STAs that do not support WMM to connect to a WMM-enabled AP.

To configure this parameter, run the wmm mandatory enable command.

Auto-off start time

Start time for scheduled VAP auto-off.

To configure this parameter, run the auto-off service command.

Auto-off end time

End time for scheduled VAP auto-off.

To configure this parameter, run the auto-off service command.

WiFi-light mode

Information reflected by the blinking frequency of the Wireless LED.

To configure this parameter, run the wifi-light command.

Rrm-profile

Name of the RRM profile referenced by a radio profile.

To configure this parameter, run the rrm-profile (radio profile view) command.

Air-scan-profile

Name of the air scan profile referenced by a radio profile.

To configure this parameter, run the air-scan-profile (radio profile view) command.

Utmost power switch

Whether a radio is enabled to send packets at maximum power.

To configure this parameter, run the utmost-power command.

Smart-antenna

Status of the smart antenna function.

To configure this parameter, run the smart-antenna { enable | disable } command.

Agile-antenna-polarization

Status of the self-adaptive polarization for agile antennas.

To configure this parameter, run the agile-antenna-polarization command.

CCA threshold(dBm)

CCA threshold for APs.

To configure this parameter, run the cca-threshold command.

High PER threshold(%)

Upper valid PER threshold in the smart antenna algorithm.

To configure this parameter, run the smart-antenna valid-per-scope command.

Low PER threshold(%)

Lower valid PER threshold in the smart antenna algorithm.

To configure this parameter, run the smart-antenna valid-per-scope command.

Training interval(s)

Smart antenna training interval.

To configure this parameter, run the smart-antenna training-interval command.

Training mpdu num

Number of MPDUs sent by an AP to STAs during smart antenna training.

To configure this parameter, run the smart-antenna training-mpdu-number command.

Throughput trigger training threshold (%)

Sudden performance change threshold that triggers smart antenna training.

To configure this parameter, run the smart-antenna throughput-triggered-training command.

AP EDCA parameters

EDCA parameters and ACK policy on an AP.

To configure this parameter, run the wmm edca-ap command.

AC_VO

AC_VO packets.

To configure this parameter, run the wmm edca-ap command.

AC_VI

AC_VI packets.

To configure this parameter, run the wmm edca-ap command.

AC_BE

AC_BE packets.

To configure this parameter, run the wmm edca-ap command.

AC_BK

AC_BK packets.

To configure this parameter, run the wmm edca-ap command.

ECWmax

Exponent form of the maximum contention window. ECWmin and ECWmax determine the average backoff time.

To configure this parameter, run the wmm edca-ap command.

ECWmin

Exponent form of the minimum contention window. ECWmin and ECWmax determine the average backoff time.

To configure this parameter, run the wmm edca-ap command.

AIFSN

Arbitration inter frame spacing number (AIFSN), which determines the channel idle time.

To configure this parameter, run the wmm edca-ap command.

TXOPLimit(32us)

Transmission opportunity limit (TXOPLimit), which determines the maximum duration in which a STA can occupy a channel. A larger value indicates a longer duration.

To configure this parameter, run the wmm edca-ap command.

Ack-Policy

ACK policy. It includes:

  • normal: During 802.11 packet exchange, the receiver sends an ACK packet to confirm the receiving of a packet from the sender.

  • noack: The receiver sends no ACK packet to confirm the receiving of a packet from the sender. It applies to scenarios where communication quality is good and interference is low.

To configure this parameter, run the wmm edca-ap command.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123777

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next