Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap-card statistics
Function
The display ap-card statistics command displays statistics on the packets received and sent by cards on APs.
Usage Guidelines
You can run this command to check statistics on the packets received and sent by cards on APs.
Example
# Display statistics on the packets received and sent by cards on all APs.
<HUAWEI> display ap-card statistics all
------------------------------------------------------------------------------------------------------
AP ID Card-number RX-packets TX-packets RX-bytes TX-bytes
------------------------------------------------------------------------------------------------------
2 1 1 2 100 200
------------------------------------------------------------------------------------------------------
Total: 1
# Display statistics on the packets received and sent by cards on AP 2.
<HUAWEI> display ap-card statistics ap-id 2
------------------------------------------------------------------------------------------------------
AP ID Card-number Card-status RX-packets TX-packets RX-bytes TX-bytes
------------------------------------------------------------------------------------------------------
2 1 present 1 2 100 200
2 2 absent 2 1 89 14
2 3 absent 0 0 0 0
2 usb absent 0 0 0 0
------------------------------------------------------------------------------------------------------
Total: 4
Table 11-266 Description of the display ap-card statistics all command output
Item |
Description |
|---|---|
AP ID |
AP ID. |
Card-number |
Card number. |
| Card-status | Whether a card is installed in the slot.
|
| RX-packets | Number of packets sent to a card. |
| TX-packets | Number of bytes received from a card. |
| RX-bytes | Number of bytes sent to a card. |
| TX-bytes | Number of bytes received from a card. |
Previous
