No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap update reset

ap update reset

Function

The ap update reset command restarts a specified AP.

Format

ap update reset { ap-name ap-name | ap-mac ap-mac | ap-id ap-id }

Parameters

Parameter

Description

Value

ap-name ap-name

Specifies the name of the AP to be restarted.

The AP name must already exist.

ap-mac ap-mac

Specifies the MAC address of the AP to be restarted.

The AP's MAC address must already exist.

ap-id ap-id

Specifies the ID of the AP to be restarted.

The AP ID must already exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After a single AP has been upgraded, run the ap update reset command to restart the AP and make the AP upgrade take effect.

Prerequisites

The AP is in normal or vmiss state.

The specified AP has been upgraded using the ap update load { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } update-filename update-file-name command.

Example

# Restart AP N1-2 after the upgrade.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap update load ap-name N1-2 update-filename huawei.bin
[HUAWEI-wlan-view] ap update reset ap-name N1-2
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115755

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next