No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display location-profile

display location-profile

Function

The display location-profile command displays configuration information about a location profile.

The display references location-profile command displays reference information about a location profile.

Format

display location-profile { all | name profile-name }

display references location-profile name profile-name

Parameters

Parameter

Description

Value

all

Specifies all location profiles.

-

name profile-name

Specifies a location profile.

The location profile name must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view configuration information about a location profile to verify the configuration.

Example

# Display all location profiles.
<HUAWEI> display location-profile all
----------------------------------------------------------
Profile name                   Reference
----------------------------------------------------------
default                             1
----------------------------------------------------------
Total: 1
Table 11-158  Description of the display location-profile all command output

Item

Description

Profile name

Name of a location profile.

Reference

Number of times a location profile is referenced.

# Display the default configuration of the location profile default.
<HUAWEI> display location-profile name default
--------------------------------------------------------------------------------
Aeroscout-tag                  : disable
Aeroscout-mu                   : disable
Aeroscout ae-port              : -
Aeroscout compound-time(100ms) : 65535
Aeroscout via-AC               : disable
Aeroscout via-AC port          : -
Ekahau-tag                     : disable
Ekahau erc IP-address          : 0.0.0.0
Ekahau erc port                : -
Ekahau via-AC                  : disable
Ekahau via-AC port             : -
Source IP-address              : 0.0.0.0
private mu                     : disable
private server                 : 0.0.0.0
private server domain          : -
private server port            : -
private via-AC                 : disable
private via-AC port            : -
private report-frequency(ms)   : 20000
private report-protocol        : udp
private ssl-policy name        : -
private mu protocol-version    : v3
------------------------------------------------------------
Table 11-159  Description of the display location-profile name default command output

Item

Description

Aeroscout-tag

Whether WLAN location of AeroScout tags is enabled.

To configure the function, run the aeroscout tag-enable command.

Aeroscout-mu

Whether WLAN location of AeroScout MUs is enabled.

To configure the function, run the aeroscout mu-enable command.

Aeroscout ae-port

Port number used by APs to report location packets.

To configure the parameter, run the aeroscout server command.

Aeroscout compound-time

Aggregation time of AeroScout location packets.

To configure the parameter, run the aeroscout compound-time command.

Aeroscout via-AC

Whether AeroScout location packets are reported to the location server through an AC.
  • enable: The AeroScout location packets are reported to the location server through an AC.
  • disable: The AeroScout location packets are not reported to the location server through an AC.

To configure the parameter, run the aeroscout server command.

Aeroscout via-AC port

Port number used by an AC to report AeroScout location packets.

To configure the parameter, run the aeroscout server command.

Ekahau-tag

Whether WLAN location of Ekahau tags is enabled.

To configure the function, run the ekahau tag-enable command.

Ekahau erc IP-address

IP address of the Ekahau location server.

To configure the parameter, run the ekahau server command.

Ekahau erc port

Port number of the Ekahau location server.

To configure the parameter, run the ekahau server command.

Ekahau via-AC

Whether Ekahau location packets are reported to the location server through an AC.
  • enable: The Ekahau location packets are reported to the location server through an AC.
  • disable: The Ekahau location packets are not reported to the location server through an AC.

To configure the parameter, run the ekahau server command.

Ekahau via-AC port

Port number used by an AC to report Ekahau location packets.

To configure the parameter, run the ekahau server command.

Source IP-address

Source IP address used by an AC to report location packets.

To configure the parameter, run the source (location profile view) command.

private mu

Whether terminal location is enabled.

To configure the function, run the private mu-enable command.

private server

IP address of the terminal location server.

To configure the parameter, run the private server command.

private server domain

Domain name of the terminal location server.

To configure the parameter, run the private server command.

private server port

Port number of the terminal location server.

To configure the parameter, run the private server command.

private via-AC

Whether terminal location packets are reported to the location server through an AC.
  • enable: The terminal location packets are reported to the location server through an AC.
  • disable: The terminal location packets are not reported to the location server through an AC.

To configure the parameter, run the private server command.

private via-AC port

Port number used by an AC to report terminal location packets.

To configure the parameter, run the private server command.

private report-frequency(ms)

Interval at which an AP reports terminal location packets.

To configure the parameter, run the private report-frequency command.

private report-protocol

Protocol used by an AP to report information.

To configure the parameter, run the private report-protocol command.

private ssl-policy name

SSL policy used when the terminal location protocol is HTTPS.

To configure the parameter, run the private report-protocol command.

private mu protocol-version Terminal location protocol version.

To configure the parameter, run the private mu protocol-version command.

# Display reference information about the location profile default.
<HUAWEI> display references location-profile name default
------------------------------------------------------------
Reference type  Reference name                       Reference radio
------------------------------------------------------------
AP group       ap-group1                             Radio-0
AP ID          0                                     Radio-1
------------------------------------------------------------
Total: 2
Table 11-160  Description of the display references location-profile command output

Item

Description

Reference type

Type of the profile that references the location profile.

Reference name

Name of the profile that references the location profile.

Reference radio

AP radio by which a location profile is referenced

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124958

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next