wds-whitelist-profile
Format
wds-whitelist-profile name whitelist-name
undo wds-whitelist-profile { all | name whitelist-name }
Parameters
Parameter |
Description |
Value |
|---|---|---|
name whitelist-name |
Specifies the name of a WDS whitelist profile. |
The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" "). |
all |
Deletes all WDS whitelist profiles. |
- |
Usage Guidelines
After a WDS whitelist profile is created using the wds-whitelist-profile command, you can run the peer-ap mac (WDS whitelist profile view) command in the WDS whitelist profile view to add MAC addresses of peer APs that are allowed to set up WDS links with the local AP to the profile.
Example
# Create the WDS whitelist profile whitelist and add the MAC address 0001-0001-0001 to the whitelist profile. Bind the WDS whitelist profile whitelist to radio 0 of APs in the AP group group1.
<HUAWEI> system-view [HUAWEI] wlan [HUAWEI-wlan-view] wds-whitelist-profile name whitelist [HUAWEI-wlan-wds-whitelist-whitelist] peer-ap mac 0001-0001-0001 [HUAWEI-wlan-wds-whitelist-whitelist] quit [HUAWEI-wlan-view] ap-group name group1 [HUAWEI-wlan-ap-group-group1] radio 0 [HUAWEI-wlan-group-radio-group1/0] wds-whitelist-profile whitelist
Previous
