No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
channel-switch mode

channel-switch mode


The channel-switch mode command configures an announcement mode for channel switching.

The undo channel-switch mode command restores the default announcement mode for channel switching.

By default, data transmission from STAs continues on the current channel when the channel is switched.


channel-switch mode { stop-transmitting | continue-transmitting }

undo channel-switch mode






Stops data transmission from STAs on the current channel during channel switching.



Continues data transmission from STAs on the current channel during channel switching.



2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

During channel switching, STA communication is interrupted. The administrator can stop an associated STA sending data on the current channel until channel switching is complete. Alternatively, data transmission from STAs can be continued on the current channel before channel switching is complete.


# Stop data transmission from STAs on the current channel during channel switching.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name default
[HUAWEI-wlan-radio-2g-prof-default] channel-switch mode stop-transmitting
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127747

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next