No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap global configuration

display ap global configuration


The display ap global configuration command displays AP global configuration.


display ap global configuration




All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view AP global information.


# Display AP global configuration.

<HUAWEI> display ap global configuration
AP auth-mode                       : MAC-auth
AP LLDP switch                     : disable
AP username/password               : -/******
AP data collection                 : disable
AP data collection interval(minute): 5
Table 11-14  Description of the display ap global configuration command output
Item Description

AP auth-mode

AP authentication mode.

To configure the parameter, run the ap auth-mode command.

AP LLDP switch

Whether LLDP is enabled on an AP.

To configure the parameter, run the ap lldp enable command.

AP username/password

User name and password for AP login.

To configure the parameter, run the ap username command.

AP data collection

Whether data buffering is enabled on an AP.

To configure the parameter, run the ap data-collection enable command.

AP data collection interval(minute)

AP data buffering duration.

To configure the parameter, run the ap data-collection interval command.

Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126176

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next