No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mld-snooping enable (AP wired port profile view)

mld-snooping enable (AP wired port profile view)

Function

The mld-snooping enable command enables MLD snooping on an AP's wired port.

The undo mld-snooping enable command disables MLD snooping on an AP's wired port.

By default, MLD snooping is disabled on an AP's wired port.

Format

mld-snooping enable

undo mld-snooping enable

Parameters

None

Views

AP wired port profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

MLD snooping is a basic IPv6 Layer 2 multicast function that forwards and controls multicast traffic at the data link layer. MLD snooping runs on a Layer 2 device and analyzes MLD messages exchanged between a Layer 3 device and hosts to set up and maintain a Layer 2 multicast forwarding table. The Layer 2 device forwards multicast packets based on the Layer 2 multicast forwarding table.

Prerequisites

An AP wired port profile has been created.

Precautions

The AP wired interfaces added to an Eth-trunk interface do not support this function.

Example

# Enable MLD snooping on AP wired port profile p1.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wired-port-profile name p1
[HUAWEI-wlan-wired-port-p1] mld-snooping enable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116123

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next