Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
port-link-profile (AP wired port profile view)
Usage Guidelines
Usage Scenario
After you create an AP wired port link profile using the port-link-profile (WLAN view) command, bind it to an AP wired port profile so that the AP wired port link profile can take effect.
Precautions
After an AP wired port link profile is bound to an AP wired port profile, parameter settings in the AP wired port link profile apply to specified interfaces of all APs using the AP wired port profile.
Example
# Create the AP wired port link profile port-link1 and bind it to the AP wired port profile wired-port1.
<HUAWEI> system-view [HUAWEI] wlan [HUAWEI-wlan-view] port-link-profile name port-link1 [HUAWEI-wlan-port-link-prof-port-link1] quit [HUAWEI-wlan-view] wired-port-profile name wired-port1 [HUAWEI-wlan-wired-port-wired-port1] port-link-profile port-link1
Previous
