No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mesh-profile radio

mesh-profile radio


The mesh-profile radio command binds a Mesh profile to an AP group or AP.

The undo mesh-profile radio command unbinds a Mesh profile from an AP group or AP.

By default, no Mesh profile is bound to an AP group or AP.


mesh-profile profile-name radio { all | radio-id }

undo mesh-profile radio { all | radio-id }






Specifies the name of the Mesh profile bound to an AP group or AP.

The Mesh profile must exist.


Binds a Mesh profile to all AP radios.



Binds a Mesh profile to a specified AP radio.

The radio ID must exist.


AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a Mesh profile is bound to an AP group or AP, a Mesh VAP will be generated on AP radios to provide Mesh services for users.


A Mesh profile has been created and properly configured.


Among the VAPs created after a Mesh profile is bound to a radio, the VAP with the WLAN ID 16 cannot be occupied.

An AP radio can only have one Mesh profile bound.

On a triple-radio AP, radio 2 does not support the Mesh function.

Since the WLAN WDS and Mesh functions are mutually exclusive, the WDS and Mesh profiles cannot be applied to an AP radio at the same time.


# Bind the Mesh profile test to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] mesh-profile test radio 0
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116454

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next