No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap modify

ap modify

Function

The ap modify command changes the MAC address of an AP.

Format

ap modify ap-id mac ap-mac

Parameters

Parameter

Description

Value

ap-id

Specifies the ID of the AP to be replaced.

The AP ID must exist.

mac ap-mac

Specifies the MAC address of a new AP.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When AP hardware needs to be replaced, you can change the MAC address of the AP to that of a new AP to prevent repetitive data configurations. After the change, the new AP goes online using the ID of the original AP, and all data configurations of the original AP take effect on the new AP.

By default, you can run the display ap { all | ap-group ap-group } command to check the MAC address of an AP.

Precautions

Replacing an AP enables the new AP to go online on the AC but will interrupt services of the original AP.

Example

# Replace the AP with the ID 0 with the AP with the MAC address 0002-1110-0120.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap modify 0 mac 0002-1110-0120 
Warning: Modify AP will influence the service that has published in AP, Whether to continue? [Y/N]y
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127916

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next