No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ble-profile (WLAN view)

ble-profile (WLAN view)

Function

The ble-profile command creates a BLE profile or displays the BLE profile view.

The undo ble-profile command deletes a BLE profile.

By default, no BLE profile is created.

Format

ble-profile name profile-name

undo ble-profile { name profile-name | all }

Parameters

Parameter

Description

Value

name profile-name

Specifies the name of a BLE profile, which must be unique and identifies a profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").

all

Deletes all BLE profiles.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run this command to create or delete a BLE profile or enter the BLE profile view to configure the profile. If the specified profile name does not exist, this command creates a new BLE profile and displays the configuration view of this profile. All parameters in this profile use default values. You can also change values of these parameters.

Follow-up Procedure

After creating a BLE profile, you need to run the ble-profile (AP group view and AP view) command in the AP view or AP group view to bind the profile to make the settings in the profile take effect.

Precautions

A BLE profile bound to an AP or AP group cannot be deleted. To delete a BLE profile, unbind it in the AP view or AP group view.

Example

# Create BLE profile huawei and enter its view.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ble-profile name huawei
[HUAWEI-wlan-ble-prof-huawei]
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126560

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next