No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
qbss-load enable

qbss-load enable


The qbss-load enable command enables the function of notifying STAs of the AP load status.

The undo qbss-load enable command disables the function of notifying STAs of the AP load status.

By default, the function of notifying STA of the AP load is disabled.


qbss-load enable

undo qbss-load enable




SSID profile view

Default Level

2: Configuration level

Usage Guidelines

After the qbss-load enable command is executed, APs notify STAs of the AP load status during the STA association. The notified information includes the number of STAs associated with the ratio and channel utilization. STAs choose to associate with the optimal AP based on the AP status, improving air interface performance.


This command takes effect only when the dynamic load balancing function is disabled. If the dynamic load balancing function is enabled, the AP notifies the STA of the load status.


# Enable the function of notifying STAs of the AP load status in the SSID profile ssid1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ssid-profile name ssid1
[HUAWEI-wlan-ssid-prof-ssid1] qbss-load enable
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123027

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next