No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
roaming-consortium-profile (Hotspot2.0 profile view)

roaming-consortium-profile (Hotspot2.0 profile view)


The roaming-consortium-profile command binds a roaming consortium profile to a Hotspot2.0 profile.

The undo roaming-consortium-profile command unbinds a roaming consortium profile from a Hotspot2.0 profile.

By default, no roaming consortium profile is bound to a Hotspot2.0 profile.


roaming-consortium-profile profile-name

undo roaming-consortium-profile






Specifies the name of a roaming consortium profile.

The roaming consortium profile must exist.


Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure Hotspot2.0 services for networks. When user terminals connect to the networks, they can obtain OIs of the operators used for STA roaming, which helps them select desired networks. You can run the roaming-consortium-profile command to create a roaming consortium profile and the roaming-consortium-oi command in the roaming consortium profile view to configure operator OIs, and then bind the roaming consortium profile to a Hotspot2.0 profile to make the configuration take effect.


# Bind roaming consortium profile roaming-consortium-profile1 to the Hotspot 2.0 profile hotspot.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] roaming-consortium-profile roaming-consortium-profile1
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127745

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next