No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ssid-profile (WLAN view)

ssid-profile (WLAN view)


The ssid-profile command creates an SSID profile and displays the SSID profile view, or displays the view of an existing SSID profile.

The undo ssid-profile command deletes an SSID profile.

By default, the system provides the SSID profile default.


ssid-profile name profile-name

undo ssid-profile { name profile-name | all }





name profile-name

Specifies the name of an SSID profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").


Deletes all SSID profiles.



WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

An SSID profile is mainly used to configure STA association and access parameters based on SSIDs, including the SSID name, STA association timeout period, non-HT STA access, and QoS CAR.

Follow-up Procedure

Run the ssid-profile (VAP profile view) command to bind the SSID profile to a VAP profile and run the vap-profile command to bind the VAP profile to an AP group, AP, AP radio, or AP group radio so that the SSID profile can take effect.


  • The SSID profile default cannot be deleted.

  • The SSID profile referenced by a VAP profile cannot be deleted. To delete the SSID profile, unbind it from the VAP profile first.

  • If the VAP profile has been applied to an AP group or an AP, modifying the SSID profile will interrupt services.


# Create an SSID profile ssid1 and enter the SSID profile view.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ssid-profile name ssid1
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113204

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next