No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
max-sta-number (SSID profile view)

max-sta-number (SSID profile view)

Function

The max-sta-number command sets the maximum number of successfully associated STAs on a VAP.

The undo max-sta-number command restores the default maximum number of successfully associated STAs on a VAP.

By default, a VAP allows for a maximum of 64 successfully associated STAs.

Format

max-sta-number max-sta-number

undo max-sta-number

Parameters

Parameter

Description

Value

max-sta-number

Specifies the maximum number of successfully associated STAs on a specified VAP.

The value is an integer that ranges from 1 to 512.

Views

SSID profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

More access users on a VAP indicate fewer network resources that each user can occupy. To ensure Internet experience of users, you can run the max-sta-number command to set a proper maximum number of successfully associated STAs on a VAP.

Configuration Impact

After th max-sta-number command is executed, online STAs are forcibly to go offline. When STAs reassociate with the VAP and the number of associated STAs on the VAP reaches the maximum, new STAs fail to associate with this VAP.

The max-sta-number max-sta-number command sets the maximum number of successfully associated STAs on a VAP while the authentication wlan-max-user max-user-number command sets the maximum number of STAs authenticated and allowed to pass through in an authentication profile.

Precautions

The maximum number of successfully associated STAs on a specified VAP refers to the maximum number of successfully associated STAs on a VAP of a single AP.

Example

# Set the maximum number of successfully associated STAs on a VAP to 50.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ssid-profile name ssid1
[HUAWEI-wlan-ssid-prof-ssid1] max-sta-number 50
Warning: This action may cause service interruption. Continue?[Y/N]y
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113615

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next