No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
active-dull-client enable

active-dull-client enable


The active-dull-client enable command enables the function of preventing terminals from entering energy-saving mode.

The undo active-dull-client enable command disables the function.

By default, the function of preventing terminals from entering energy-saving mode is disabled.


active-dull-client enable

undo active-dull-client enable




SSID profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Due to individual reasons, some terminals may not run services normally when entering energy-saving mode. You can run the active-dull-client enable command to enable the function of preventing terminals from entering energy-saving mode. After that, an AP frequently sends null data frames to these terminals to prevent them from entering energy-saving mode, ensuring normal services.


After the function is enabled, the terminals consume more power and extra bandwidth. If no terminal enters an abnormal energy-saving state, you are advised to disable the function.


# Enable the function of preventing terminals from entering energy-saving mode.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ssid-profile name ssid1
[HUAWEI-wlan-ssid-prof-ssid1] active-dull-client enable
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124968

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next