No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ekahau server

ekahau server

Function

The ekahau server command sets the destination IP address and port number for APs to report Ekahau tag location packets.

The undo ekahau server command deletes the configured destination IP address and port number for APs to report Ekahau tag location packets.

By default, no destination IP address or port number is configured for APs to report Ekahau tag location packets.

Format

ekahau server ip-address ip-address port port-num [ via-ac ac-port ac-port-num ]

undo ekahau server

Parameters

Parameter Description Value
ip-address ip-address Specifies the IPv4 address of the Ekahau location server.

The value is in dotted decimal notation.

port port-num

Specifies the destination port number on the Ekahau location server to which APs directly report Ekahau tag location packets.

Specifies the destination port number on the Ekahau location server to which APs report Ekahau tag location packets through an AC.

The value is an integer that ranges from 1 to 65535.
via-ac Specifies that the Ekahau tag location packets received by APs are reported to the Ekahau location server through an AC. -
ac-port ac-port-num Specifies the destination port number on the AC to which APs report Ekahau tag location packets. The value is an integer that ranges from 1025 to 65535.

Views

Location profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The Ekahau tag location packets received by APs can be reported to the Ekahau location server directly or through an AC.

Precautions

You cannot configure a port number that has been occupied by other services; otherwise, the port configuration fails.

For the same location method, via-ac can be configured only in one profile. If via-ac has been specified in the current location profile for a specific location method, it cannot be specified in other profiles for the same location method.

Example

# Set the destination IP address and port number on the location server to which APs report Ekahau tag location packets to 192.168.1.2 and 8569, respectively.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] location-profile name huawei
[HUAWEI-wlan-location-prof-huawei] ekahau server ip-address 192.168.1.2 port 8569
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127058

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next