No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wired-port-profile (IoT card interface view)

wired-port-profile (IoT card interface view)


The wired-port-profile command binds a specified AP wired port profile to an IoT card.

The undo wired-port-profile command unbinds the AP wired port profile from an IoT card.

By default, no AP wired port profile is bound to an IoT card.


wired-port-profile profile-name

undo wired-port-profile






Specifies the name of an AP wired port profile.

The AP wired port profile must exist.


IoT card interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When an IoT card communicates with an AP through an Ethernet interface, to configure this Ethernet interface, you can set parameters in an AP wired port profile and bind it to the IoT card.


The IoT card has been configured to communicate with the AP through an Ethernet interface using the card connect-type ethernet command.


# Bind AP wired port profile wired-port1 to IoT card 1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] wired-port-profile name wired-port1
[HUAWEI-wlan-wired-port-wired-port1] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] card 1
[HUAWEI-wlan-group-card-group1/1] wired-port-profile wired-port1
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127917

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next