No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wapi sa-timeout

wapi sa-timeout

Function

The wapi sa-timeout command sets the timeout period of a security association (SA) of key encryption.

The undo wapi sa-timeout command restores the default timeout period of a SA for key encryption.

By default, the timeout period for a SA is 60s.

Format

wapi sa-timeout sa-time

undo wapi sa-timeout

Parameters

Parameter

Description

Value

sa-time

Specifies the timeout period of an SA.

The value is an integer that ranges from 1 to 255, in seconds.

Views

Security profile view

Default Level

2: Configuration level

Usage Guidelines

You can prolong the WAPI timeout period to increase the authentication success ratio.

Example

# Set the timeout period of an SA to 100s.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] security-profile name p1
[HUAWEI-wlan-sec-prof-p1] wapi sa-timeout 100
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113195

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next