No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset wlan ids device-detected

reset wlan ids device-detected


The rreset wlan ids device-detected command deletes information about the wireless devices detected.


reset wlan ids device-detected { all | [ interference | rogue ] ap | [ rogue ] bridge | [ rogue ] client | adhoc | ssid [ ssid ] | mac-address mac-address }






Deletes information about all the wireless devices detected.



Deletes information about the interfering devices detected.



Deletes information about the rogue devices detected.



Deletes information about the APs detected.



Deletes information about the bridge devices detected.



Deletes information about the user terminals detected.



Deletes information about detected user terminals that belong to Adhoc network.


ssid [ ssid ]

Deletes information about detected devices with specified SSID or all SSIDs.

The SSID must exist. To specify an SSID starting with a space, include the SSID with double quotation marks (" "). For example, in the SSID " hello", the double quotation marks at the start and end of the SSID occupy two characters. To specify an SSID starting with a double quotation mark ("), enter an escape character (\) before the double quotation mark. For example, in the SSID \"hello, the escape character (\) occupies one character.

mac-address mac-address

Deletes information about detected devices with specified MAC addresses.

The value must be an existing MAC address.


All views

Default Level

3: Management level

Usage Guidelines

Usage Scenario

When there is excessive information about wireless devices recorded or the recorded information is useless, you can run the reset wlan ids device-detected command to delete the information.


The reset wlan ids device-detected ssid ssid command cannot delete device information containing special characters (such as tabs) from the SSID. To delete such information, run the reset wlan ids device-detected mac-address mac-address or reset wlan ids device-detectedall command.


# Delete information about all the wireless devices detected.

<HUAWEI> reset wlan ids device-detected all
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 112946

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next