No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
destination (soft GRE profile view)

destination (soft GRE profile view)

Function

The destination command specifies the destination address of a soft GRE tunnel.

The undo destination command restores the default destination address of a soft GRE tunnel.

By default, the destination address of a soft GRE tunnel is not configured.

Format

destination { ip-address destination-ip-address | ipv6-address destination-ipv6-address }

undo destination

Parameters

Parameter Description Value
ip-address destination-ip-address

Specifies the destination IPv4 address of a soft GRE tunnel.

The value is in dotted decimal notation.

ipv6-address destination-ipv6-address

Specifies the destination IPv6 address of a soft GRE tunnel.

The value is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X.

Views

Soft GRE profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In soft GRE tunnel forwarding mode, the destination address of a soft GRE tunnel must be configured, that is, the IP address of the remote end for the soft GRE tunnel, so that service data can be forwarded to the specified destination address.

Precautions

The route between the AP and destination address of the soft GRE tunnel must be reachable.

The destination address of the soft GRE tunnel must be configured in a soft GRE profile. The same destination address cannot be configured in different soft GRE profiles.

If the type of an AP's IP address is different from that of the destination address configured in the soft GRE profile, the soft GRE tunnel cannot be created on the AP.

If you run the destination command multiple times, the latest configuration takes effect.

Example

# Set the destination address of a soft GRE tunnel to 10.10.1.1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] softgre-profile name soft1
[HUAWEI-wlan-softgre-prof-soft1] destination ip-address 10.10.1.1
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114515

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next