No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The location-profile command binds a location profile to an AP radio.

The undo location-profile command unbinds a location profile from an AP radio.

By default, no location profile is bound to a radio.


location-profile profile-name radio { radio-id | all }

undo location-profile radio { radio-id | all }






Specifies the name of a location profile.

The location profile name must already exist.
radio radio-id

Specifies the ID of the radio to which the location profile is bound.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AP4030TN, AP4051TN, and AP8050TN-HD.


Binds the location profile to all radios.



AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

You can run this command to bind a location profile to an AP group radio or AP radio. After the binding, the parameters of the location profile will be applied to the AP group radio or AP radio.


# Bind the location profile default to radio 0 of the AP group ap-group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name ap-group1
[HUAWEI-wlan-ap-group-ap-group1] location-profile default radio 0
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115289

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next