No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap config-info

display ap config-info

Function

The display ap config-info command displays AP configuration.

Format

display ap config-info { ap-name ap-name | ap-id ap-id }

Parameters

Parameter

Description

Value

ap-name ap-name

Displays configuration of the AP with a specified name.

The AP name must exist.

ap-id ap-id

Displays configuration of the AP with a specified ID.

The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display ap config-info command to view AP configuration information, including the basic configuration, radio configuration, VAP configuration, and profile configuration.

Example

# Display the configuration of AP huawei.

<HUAWEI> display ap config-info ap-name huawei
--------------------------------------------------------------------------------
AP MAC                          : dcd2-fcf6-76a0
AP SN                           : 210235419610D2000097
AP type                         : AP6010DN-AGN
AP name                         : huawei
AP group                        : default
Country code                    : CN
--------------------------------------------------------------------------------
Radio 0 configurations:
 Radio enable                   : yes
 Work mode                      : normal
 WDS  mode                      : -
 Mesh mode                      : -
 Radio band                     : 2.4G
 Radio type                     : bgn
 Flexible radio switch          : on
 Config channel/bandwidth       : -/20M
 Actual channel/bandwidth       : 1/20M
 Config EIRP                    : 127
 Actual EIRP                    : 27
 Maximum EIRP                   : 27

 VAP configurations:
  WLAN ID 1:
   SSID                         : HUAWEI-WLAN
   Forward mode                 : direct-forward
   Authen mode                  : Open
   Encrypt mode                 : -
   Service vlan                 : 100
--------------------------------------------------------------------------------
Radio 1 configurations:
 Radio enable                   : yes
 Work mode                      : normal
 WDS  mode                      : -
 Mesh mode                      : -
 Radio band                     : 5G
 Radio type                     : an
 Flexible radio switch          : on
 Config channel/bandwidth       : -/20M
 Actual channel/bandwidth       : 157/20M
 Config EIRP                    : 127
 Actual EIRP                    : 28
 Maximum EIRP                   : 28

 VAP configurations:
  WLAN ID 1:
   SSID                         : HUAWEI-WLAN
   Forward mode                 : direct-forward
   Authen mode                  : Open
   Encrypt mode                 : -
   Service vlan                 : pool a
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
AP system profile          : default
Regulatory domain profile  : default
WIDS profile               : default
BLE profile                :
UUID                       :
Domain name                : huawei.com
AP wired port profile
 Interface FE0             : default
 Interface FE1             : default
 Interface FE2             : default
 Interface FE3             : default
 Interface GE0             : default
 Interface GE1             : default
 Interface GE2             : default
 Interface GE3             : default
 Interface GE4             : default
 Interface GE5             : default
 Interface GE6             : default
 Interface GE7             : default
 Interface GE8             : default
 Interface GE9             : default
 Interface GE10            : default
 Interface GE11            : default
 Interface GE12            : default
 Interface GE13            : default
 Interface GE14            : default
 Interface GE15            : default
 Interface GE16            : default
 Interface GE17            : default
 Interface GE18            : default
 Interface GE19            : default
 Interface GE20            : default
 Interface GE21            : default
 Interface GE22            : default
 Interface GE23            : default
 Interface GE24            : default
 Interface GE25            : default
 Interface GE26            : default
 Interface GE27            : default
 Interface MultiGE0       : default
 Interface XGE0            : default
 Interface XGE1            : default
 Interface XGE2            : default
 Interface XGE3            : default
 Interface Eth-trunk0      : default
Radio 0
 Radio 2.4G profile        : default
 Radio 5G profile          : 
 VAP profile
  WLAN  1                  : default(VLAN 100)
 Mesh profile              :
 WDS profile               :
 Mesh whitelist profile    :
 WDS whitelist profile     :
 Location profile          :
 Radio switch              : enable
 Channel                   : -
 Channel bandwidth         : 20mhz
 EIRP(dBm)                 : 127
 Antenna gain(dB)          : -
 Coverage distance(100 m)  : 3
 Work mode                 : normal
 Flexible radio switch     : on
 Radio frequency           : 2.4G
 Spectrum analysis         : disable
 WIDS device detect        : disable
 WIDS attack detect        : -
 WIDS contain switch       : disable
Radio 1
 Radio 2.4G profile       : 
 Radio 5G profile          : default
 VAP profile
  WLAN  1                  : default(VLAN pool a)
 Mesh profile              :
 WDS profile               :
 Mesh whitelist profile    :
 WDS whitelist profile     :
 Location profile          :
 Radio switch              : enable
 Channel                   : -
 Channel bandwidth         : 20mhz
 EIRP(dBm)                 : 127
 Antenna gain(dB)          : -
 Coverage distance(100 m)  : 3
 Work mode                 : normal
 Flexible radio switch     : on
 Radio frequency           : 5G
 Spectrum analysis         : disable
 WIDS device detect        : disable
 WIDS attack detect        : -
 WIDS contain switch       : disable
Card 1:
 Card connect type         : -
 Wired port profile        :
 Iot profile               :
 Protocol Type             : - 
 First Port                : - 
 Extended Port             : - 
Card 2
 Card connect type         : -
 Wired port profile        :
 Iot profile               :
 Protocol Type             : - 
 First Port                : - 
 Extended Port             : - 
Card 3
 Card connect type         : -
 Wired port profile        :
 Iot profile               :
 Protocol Type             : - 
 First Port                : - 
 Extended Port             : - 
Card usb
 Iot profile               :
 Protocol Type             : - 
 First Port                : - 
 Extended Port             : - 
---------------------------------------------------------------------------------
Table 11-9  Description of the display ap config-info command output

Item

Description

AP MAC

MAC address of an AP.

AP SN

SN of an AP.

AP type

AP type.

AP name

AP name.

To configure the parameter, run the ap-name (AP view) or ap-rename command.

Domain name

Default domain name suffix of the AP.

To configure the parameter, run the ip domain-name command.

AP group

AP group.

To configure the parameter, run the ap-group (AP view) or ap-regroup command.

Country code

Country code.

To configure the parameter, run the country-code command.

Radio 0 configurations/Radio 1 configurations

Radio configuration.

Radio enable

Radio status.

To configure the parameter, run the radio disable command.

Work mode

Working mode of a radio.

To configure the parameter, run the work-mode command.

WDS mode

WDS mode.

To configure the parameter, run the wds-mode command.

Mesh mode

Mesh role of a radio.

To configure the parameter, run the mesh-role command.

Radio band

Frequency band of a radio.

To configure the parameter, run the frequency command.

Radio type

Protocol type of a radio.

Flexible radio switch

Whether the DFA function of a radio is enabled.

To configure the parameter, run the calibrate flexible-radio disable command.

Config channel/bandwidth

Configured AP channel and bandwidth.

To configure the parameter, run the channel command.

Actual channel/bandwidth

Actual AP channel and bandwidth.

Config EIRP

Transmit power of a radio configured in the radio profile.

To configure the parameter, run the eirp command.

Actual EIRP

Actual transmit power of a radio.

Maximum EIRP

Maximum transmit power of a radio.

VAP configurations

VAP configuration. VAP configuration is displayed only after a VAP profile is referenced by the AP.

WLAN ID 1

WLAN ID of a VAP.

To configure the parameter, run the vap-profile command.

SSID

SSID name.

To configure the parameter, run the ssid command.

Forward mode

Forwarding mode.

To configure the parameter, run the forward-mode command.

Authen mode

Authentication mode.

Encrypt mode

Encryption mode.

Service vlan

Effective service VLAN.

AP system profile

Name of the referenced AP system profile.

To configure the parameter, run the ap-system-profile (AP group view and AP view) command.

Regulatory domain profile

Name of the referenced regulatory domain profile.

To configure the parameter, run the regulatory-domain-profile command.

WIDS profile

Name of the referenced WIDS profile.

To configure the parameter, run the wids-profile (AP group view and AP view) command.

BLE profile

Name of the referenced BLE profile.

UUID UUID of a BLE broadcast frame sent by the AP's built-in Bluetooth module.

To configure the parameter, run the broadcasting-content (AP group view and AP view) command.

AP wired port profile

Name of the referenced AP wired port profile.

To configure the parameter, run the wired-port-profile (AP group view and view) command.

Interface interface-name

Interface name and number.

Radio 0/Radio 1

Radio frequency.

Radio 2.4G profile

Name of the referenced 2G radio profile.

To configure the parameter, run the radio-2g-profile command.

Radio 5G profile

Name of the referenced 5G radio profile.

To configure the parameter, run the radio-5g-profile command.

VAP profile

Name of the referenced VAP profile.The displayed format is "VAP ID:VAP profile name (service VLAN defined when binding to the VAP profile, single VLAN, or VLAN pool)."

To configure the parameter, run the vap-profile command.

Mesh profile

Name of the referenced Mesh profile.

To configure the parameter, run the mesh-profile radio command.

WDS profile

Name of the referenced WDS profile.

To configure the parameter, run the wds-profile radio command.

Mesh whitelist profile Mesh whitelist profile referenced by an AP group.

To configure the parameter, run the mesh-whitelist-profile (AP group radio view or AP radio view) command.

WDS whitelist profile WDS whitelist profile referenced by an AP group.

To configure the parameter, run the wds-whitelist-profile (AP group radio view or AP radio view) command.

Location profile

Name of the referenced location profile.

To configure the parameter, run the location-profile command.

Radio switch

Radio status.

To configure the parameter, run the radio disable command.

Channel

Working channel of a radio.

To configure the parameter, run the channel command.

Channel bandwidth

Working bandwidth of a radio.

To configure the parameter, run the channel command.

EIRP(dBm)

Transmit power of a radio, in dBm.

To configure the parameter, run the eirp command.

Antenna gain(dB)

Antenna gain of a radio, in dB.

To configure the parameter, run the antenna-gain command.

Coverage distance(100 m)

Radio coverage distance parameter, in 100 m.

To configure the parameter, run the coverage distance command.

Work mode

Working mode of an AP.

To configure the parameter, run the work-mode command.

Radio frequency

Working frequency band of a radio.

To configure the parameter, run the frequency command.

Spectrum analysis

Whether spectrum analysis is enabled.

To configure the parameter, run the spectrum-analysis enable command.

WIDS device detect

Whether wireless device detection is enabled.

To configure the parameter, run the wids device detect enable command.

WIDS attack detect

Whether attack detection is enabled.

To configure the parameter, run the wids attack detect enable command.

WIDS contain switch

Whether rogue device containment is enabled.

To configure the parameter, run the wids contain enable command.

Card 1/Card 2/Card 3/Card usb IoT card.
Card connect type Communication connection type between IoT cards and APs.

To configure the parameter, run the card connect-type command.

Wired port profile Bound AP wired port profile.

To configure the parameter, run the wired-port-profile (IoT card interface view) command.

Iot profile Bound IoT profile.

To configure the parameter, run the iot-profile (IoT card interface view) command.

Protocol Type Communication protocol between the AP and host computer.
First Port Source port for the first channel.
Extended Port Source port for the extended channel.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126923

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next