No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cellular-network-profile (Hotspot2.0 profile view)

cellular-network-profile (Hotspot2.0 profile view)

Function

The cellular-network-profile command binds a cellular network profile to a Hotspot2.0 profile.

The undo cellular-network-profile command unbinds a cellular network profile from a Hotspot2.0 profile.

By default, no cellular network profile is bound to a Hotspot2.0 profile.

Format

cellular-network-profile profile-name

undo cellular-network-profile

Parameters

Parameter

Description

Value

profile-name

Specifies the name of a cellular network profile.

The cellular network profile must exist.

Views

Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure Hotspot 2.0 services on a cellular network. When connecting to the network, user terminals need to obtain the cellular network identifier (3GPP Cellular PLMN) from APs to select desired networks. You can run the cellular-network-profile command to create a cellular network profile and the plmn-id command to configure the Public Land Mobile Network (PLMN) identifier of the network operator, and then bind the cellular network profile to a Hotspot 2.0 profile to make the configuration take effect.

Example

# Bind cellular network profile cellular-network-profile1 to the Hotspot 2.0 profile hotspot.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] cellular-network-profile cellular-network-profile1
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124010

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next